MAPEFLOOR FINISH 53 W/L

Two-component, aliphatic, transparent, shiny polyurethane finish in water dispersion with no NMP for protecting resin systems.
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 10 : 1.
Colour of mix: transparent.
Consistency of mix: fluid.
Workability time: 15-20 minutes at +23°C.
Varnishing: from 3 to 5 hours.
Sanding: after 12 hours.
Set to the touch: 40 minutes.
Dust dry at +23°C and 50% R.H.: 40 minutes.
Set to light foot traffic at +23°C and 50% R.H.: 6-7 hours.
Final hardening time: 12 hours at +23°C.
Gloss: 80.
Taber Test (after 7 days, CS17 disk, 1000 cycles, 1000 g): 22 mg.
Storage: 12 months in its original sealed packaging.
Application: short-haired roller such as mohair or airless spray system.
Consumption: 0.1-0.2 kg/m² according to the grade of finish required for the coating material.
Packaging: 11 litre units.

İlgili belgeler

Teknik veri sayfası
İndir

Son Projeler MAPEFLOOR FINISH 53 W/L

Category icon ÜRETİM TESİSLERİ

2017

Lamborghini

Sant'Agata Bolognese, Italy

Cemetitious and resin floor coverings, Katkılar

Category icon TİCARİ TESİSLER

2017

Lamborghini Automobili

Sant'Agata Bolognese, Italy

Cemetitious and resin floor coverings

Category icon KAMU BİNALARI VE KENTSEL TASARIM

Villa Sora Institute

Frascati, Italy

Installatıon of floors

İrtibatta olalım

Mapei'den haber almak için bültenimize abone olun