MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors.
TECHNICAL DATA:
Mixing ratio: comp. A: comp. B: = 10 : 0.15.
Colour of mix: transparent, milky.
Consistency of mix: fluid.
Dry substances content (3 h - 105°C) (%): 23.
Density of mix (kg/m³): 1,028.
Viscosity of mix (mPa•s): 25 (# 1 - 100 rpm).
Workability time: 60 min.
Surface temperature: from +12°C to +30°C.
Varnishing: after 6-8 h at +23°C.
Dust dry at +23°C and 50% R.H.: 2 h.
Abrasion resistance (Taber abrasimeter) (CS 17 disk - 500 revs - 1,000 g) after 7 days (mg): 65.
Set to light foot traffic at +23°C and 50% R.H.: 24 h.
Final hardening time: 4 days.
Storage: 12 months in its original sealed packaging.
Application: short-haired roller such as mohair or a suitable airless spray system.
Consumption: 0.15-0.2 kg/m² according to the grade of porosity and absorption of the substrate.
Packaging: 20.3 kg units (A + B).

İlgili belgeler

Teknik veri sayfası
İndir

Son Projeler MAPEFLOOR FINISH 630

Category icon TİCARİ TESİSLER

2020

Office at World Tech Centre

Kwun Tong, Hong Kong

Floor/wall coverıng

Category icon TURİZM VE SAĞLIK

2020

Hotel Komune - Bali

Gianyar, Indonesia

Installatıon of floors

Category icon TİCARİ TESİSLER

2019

Foxton Store - Shopping Iguatemi

Brazil

Surface preparatıon

Category icon TİCARİ TESİSLER

2019

Foxton Store - Shopping Leblon

Brazil

Surface preparatıon, Facades maıntenance, New buıldıng

İrtibatta olalım

Mapei'den haber almak için bültenimize abone olun