MAPEFLOOR I 300 SL

Two-component, multi-purpose, neutral-coloured epoxy formulate for industrial floor coatings up to 4 mm thick.
May be coloured with MAPECOLOR PASTE.
TECHNICAL DATA:
Mixing ratio: comp. A : comp. B = 3 : 1.
Colour of mix: neutral.
Consistency of mix: thick fluid.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 24 hours.
Final hardening time: 7 days.
Taber Test after 7 days (EN ISO 5470-1) CS17 disk, 1000 cycles, 1000 g at +23°C - 50% R.H.: 70 mg.
Storage: 24 months in its original sealed packaging.
Application: by roller or flat or notched trowel.
Consumption:

  • 2.0 kg/m² for 2 mm thick self-levelling coatings on substrates primed with PRIMER SN;
  • 0.9 kg/m² for intermediate layers in 3 mm thick non-slip coatings on substrates primed with PRIMER SN;
  • 0.6 kg/m² for finishing layers in 1 mm and 3 mm thick non-slip coatings on substrates primed with PRIMER SN.
Packaging: 8 and 20 kg kits (A + B).

İlgili belgeler

Teknik veri sayfası
İndir

Son Projeler MAPEFLOOR I 300 SL

Category icon TURİZM VE SAĞLIK

2020

Waitaki Aquatic Centre

New Zealand

Installatıon of floors, Cemetitious and resin floor coverings, Sealants applıcatıon, Waterproofıng

Category icon KONUT İNŞAATLARI

Maschinenhalle, Beschichtung

Kirchschlag in der Buckligen Welt, AVUSTURYA

Beschıchtungen

Category icon KAMU BİNALARI VE KENTSEL TASARIM

2020

Floor reconstruction in the shooting range

Stráž pod Ralskem, Czech Republic

Cemetitious and resin floor coverings

Category icon ÜRETİM TESİSLERİ

2015/2016

Coca Cola - New Factory Auckland

New Zealand

Cemetitious and resin floor coverings

İrtibatta olalım

Mapei'den haber almak için bültenimize abone olun