ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
TECHNICAL DATA:
Consistency: powder.
Colour: white or natural.
Bulk density: 1,100 kg/m³.
Mixing ratio: approx. 25-29 parts of water per 100 parts by weight of ULTRATOP LOFT F.
Workability time: 20 minutes.
Setting time: 80 minutes.
Set to foot traffic: 3 hours.
Compressive strength at +23°C after 28 days: 25 N/mm².
Flexural strength at +23°C after 28 days: 10 N/mm².
Abrasion resistance - Taber abrasion meter (H22 disk, 500 g, 200 revs) after 28 days: 500 mg.
Abrasion resistance class (Böhme test) after 28 days: A9.
Application: smooth steel, Teflon or rubber trowel.
Consumption: 0.7-1 kg/m².
Packaging: 20 kg bags. Kits containing 4x5 kg alupacks.

ULTRATOP LOFT F satırların bir parçasıdır:

İlgili belgeler

Teknik veri sayfası
İndir

Son Projeler ULTRATOP LOFT F

Category icon TURİZM VE SAĞLIK

2017/2018

Contessina Suites & Spa

Greece

Cemetitious and resin floor coverings, Waterproofıng

Category icon KAMU BİNALARI VE KENTSEL TASARIM

Park Zaryadye

Moscow, Russian

Cemetitious and resin floor coverings, Surface preparatıon

Category icon TİCARİ TESİSLER

2017

Lafarge Construction Development Laboratory (CDL)

Petaling Jaya, Malaysia

Cemetitious and resin floor coverings

Category icon KAMU BİNALARI VE KENTSEL TASARIM

2011/2020

MEIS | National Museum of Italian Judaism and the Shoah

Ferarra, Italy

Installatıon of floor and wall coverıngs

İrtibatta olalım

Mapei'den haber almak için bültenimize abone olun