Product detail

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

AQUAFLEX R 77

Ready to use, flexible, liquid applied, elastic membrane for seamless waterproofing of exposed surfaces

Ready to use, flexible, liquid applied, elastic membrane for…

ULTRACARE FUGA FRESCA

Polymeric paint to refresh the colour of the cementitious grout joints between tiles

Polymeric paint to refresh the colour of the cementitious grout joints between…

ULTRACARE GROUT PROTECTOR

Water dispersion for protecting cementitious grouts and porcelain tiles

ULTRACARE GROUT RELEASE

Product in water dispersion for pre-grouting protection of porous materials

ULTRACARE STAIN PROTECTOR S

Solvent-based, natural effect blend of polymers with protective and stain-resistant properties

Solvent-based, natural effect blend of polymers with protective and…

ULTRACARE INTENSIFIER W

Water-based polymeric microemulsion with high penetration capacity and protecting and enhancing effect

Water-based polymeric microemulsion with high penetration capacity and…

ULTRACARE INTENSIFIER S

Solvent-based blend of polymers with high penetration capacity, for a colour enhancing and protective effect

Solvent-based blend of polymers with high penetration capacity, for a colour…

All-purpose, bituminous emulsion coating TECHNICAL DATA: Consistency: pasty liquid. Density: ~ 1,0 g/cm³. Solids content: ~ 40%. Storage: 12 months. Application temperature range: from +5°C to +40°C.…

All-purpose, bituminous emulsion coating TECHNICAL DATA: Consistency: pasty…

MAPECOAT W

Two-component, epoxy paint in water dispersion for protecting cementitious substrates. TECHNICAL DATA: Consistency: component A fluid paste, component B thick paste. Colour: component A transparent,…

Two-component, epoxy paint in water dispersion for protecting cementitious…

MAPEQUICK AFK 777 T

Alkali-free accelerator for shotcrete Where to use • Securing surfaces during tunnelling. • Inner lining even in presence of very squeezing soils. • Shotcrete for structural tunnel repairs. •…

Alkali-free accelerator for shotcrete Where to use • Securing surfaces during…

MAPEPLAST PMX

Admixture for enhancing the pumpability of concrete Where to use Thanks to its special formula, Mapeplast PMX makes the cement mix highly cohesive. Mapeplast PMX is especially recommended for: –…

Admixture for enhancing the pumpability of concrete Where to use Thanks to its…

MAPELUX OPACA

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA: Appearance: emulsion. Colour: bluish-white. Application temperature range: from +10°C to +30°C. pH: 8.4 ± 0.2. Storage: 12 months…

Double-reticulating, high-strength matt metallic wax. TECHNICAL DATA:…

MAPECOAT I 62 W

Two-component epoxy coating in water dispersion with a gloss finish to form smooth films of resin coating. Specifically developed for coating the surface of walls and ceilings in clean rooms.…

Two-component epoxy coating in water dispersion with a gloss finish to form…

ULTRACOAT AQUA PLUS

Solvent and NMP-free, odourless, water-based binder, mixed with wood flour filler, for grouting wooden floors. Suitable for ULTRACOAT water-based varnishing cycles and ULTRACOAT OIL. TECHNICAL DATA:…

Solvent and NMP-free, odourless, water-based binder, mixed with wood flour…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

KERASEAL

Protective, impregnating paint for porous tiles (Tuscany terracotta, etc.). TECHNICAL DATA: Consistency: highly fluid liquid. Set to light foot traffic: 12 hours. Ready for use: 3 days. Application:…

Protective, impregnating paint for porous tiles (Tuscany terracotta, etc.).…

KERACRETE

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm). TECHNICAL DATA: Pot life of mix: 90 minutes. Open time: 20 minutes. Waiting time before grouting: - on walls: 4-6 hours; - on…

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm).…

ELASTOCOLOR PRIMER

Solvent-based high-penetration consolidating primer to even out surfaces. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.96. Dry solids…

Solvent-based high-penetration consolidating primer to even out surfaces.…

ISAMITE

Bitumen paint in solvent. TECHNICAL DATA: Consistency: fluid. Colour: black. Density (g/cm³): 100. Dry solids content (%): approx. 50. Dust dry: 15-20 minutes. Consumption: – 100-150 g/m² per coat on…

Bitumen paint in solvent. TECHNICAL DATA: Consistency: fluid. Colour: black.…

Keep in touch