One-component, water-based, bituminous emulsion enhanced with rubber granules TECHNICAL CHARACTERISTICS Plastimul RBE MY is a water-emulsified, thixotropic, bituminous coating enhanced with rubber…
One-component, water-based, bituminous emulsion enhanced with rubber granules…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add between 5 and 8% on the amount of cement in the mix. Packaging: 20 kg bags. Also available in bulk quantities upon…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…
Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…
Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Where to use: walls only. Open time: ≥ 30 minutes. Waiting…
Ready-to-use adhesive paste with no vertical slip and long open time for…
Two-component epoxy paint for anti-acid and non-toxic coatings on concrete surfaces, suitable for contact with drinking water. TECHNICAL DATA: Consistency: component A thick paste, component B fluid…
Two-component epoxy paint for anti-acid and non-toxic coatings on concrete…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…
Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…
Retardant plasticiser for concrete. Mapeplast R14 SP is used for the production of concrete where a slower rate of cement hydration is required. Mapeplast R14 SP is suitable for pours in hot weather…
Retardant plasticiser for concrete. Mapeplast R14 SP is used for the production…
