Project Bulgaria Hotel, Burgas


Yard	interior and exterior
Location	Burgas, Bulgaria
Subcategory	HOTEL/INN
Built in	2019
Opened in	2020
Application	floor leveling, structural strenghtening, facades renovation, ceramic installation
Start and finish date	2019/2020
Application Type	Facade interventions, Floor/wall covering, Tile & stone installation systems
Client	Hotel Bulgaria management
Contractor company	SMK Invictus
Installer companies	SMK Invictus, Skarlevi Engineering
Project Manager	Georgi Papazov

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

EPORIP

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in screeds. Applications: Creation of monolithic adhesion between new and existing concrete. Bonding precast concrete…

Two-component solvent free epoxy adhesive, for monolithic sealing of cracks in…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at…

Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing…

MAPESIL AC

Solvent-free, acetic-cross-linking mildew-resistant silicone sealant, available in 26 colour and transparent. Applications: Interior, exterior, ceramic tile floor and wall sealing of expansion joints…

Solvent-free, acetic-cross-linking mildew-resistant silicone sealant, available…

PLANISEAL 288

Two-component cementitious mortar for waterproofing structures below ground level and storage tanks. TECHNICAL DATA: Consistency: fluid; applicable by brush. Mixing ratio: comp. A : comp. B = 4 : 1.…

Two-component cementitious mortar for waterproofing structures below ground…

PLANISEAL 88 (Former Idrosilex Pronto)

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…

Osmotic cementitious mortar suitable for contact with drinking water, for…

PRIMER G

Synthetic resin based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin based primer in water dispersion. Applications: Treating gypsum…

PRIMER SN

Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free epoxy resin-based filling primer. It is used to improve the bonding of epoxy and polyurethane Mapefloor Systems and is…

Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints 2 to 20 mm wide.…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…