Project Minion Park (Universal Studios Singapore),


Yard	Interior / Exterior
Location	Singapore
Subcategory	LEISURE CENTRE
Application	Supply and Installation of Adhesives and Grouts Products for Waterproofing
Start and finish date	2023/2024
Application Type	Tile & stone installation systems, Waterproofing systems
Contractor company	MCC Engineering / China Jingye Engineering & Const Pte Ltd
Installer companies	ADF Waterproof Ptd Ltd
Project Manager	Evelyn Tay, Ron Chai

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials (layer of adhesive up to 5 mm). The white version has very high white balance…

High-performance cementitious adhesive with no vertical slip and extended open…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

Isolastic

Flexible latex additive to be mixed with Kerabond T-R, Kerabond T-R Express and Adesilex P10. Used to impart elasticity to cement-based adhesives. Technical Data: Mixed with Kerabond T-R ans Kerabond…

Flexible latex additive to be mixed with Kerabond T-R, Kerabond T-R Express and…

KERACOLOR FF

KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm. Available in 20 colours . Mixed with the…

KERACOLOR FF is a high-performance , polymer-modified cementitious mortar with…

MAPECRETE LI HARDENER

Surface treatment in liquid form made from lithium silicate with a consolidating effect, for new or old concrete floors and concrete surfaces broadcast with quartz sand. TECHNICAL DATA: Application…

Surface treatment in liquid form made from lithium silicate with a…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar, applied by brush or by roller, for waterproofing concrete surfaces such as balconies, terraces, basins and swimming pools, and for protection…

Two-component, high-flexibility cementitious mortar, applied by brush or by…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPETOP N AR6

Pre-blended, ready-to-use industrial hardener for concrete floors made from special quartz in a granulometric curve, Portland cement and special additives. TECHNICAL DATA: Colour of mix: light grey,…

Pre-blended, ready-to-use industrial hardener for concrete floors made from…

PRIMER SN

Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free epoxy resin-based filling primer. It is used to improve the bonding of epoxy and polyurethane Mapefloor Systems and is…

Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free…

PROSFAS

Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…

Water-based, solvent-free consolidator with high penetration properties for…

PURTOP 1000

Two-component, solvent-free, pure polyurea membrane applied by spray with a high-pressure, bi-mixer type pump, to form waterproof coatings directly on site. TECHNICAL DATA: A/B ratio (by volume):…

Two-component, solvent-free, pure polyurea membrane applied by spray with a…