MAPEFLOOR I 360 AS

Two-component, self-levelling epoxy formulate for high strength, electrically conductive coatings.
TECHNICAL DATA:
Mixing ratio: comp. A: comp. B: = 80 : 20 by weight.
Colour of mix: neutral.
Consistency of mix: fluid.
Density of mix (kg/m³): 1,420.
Viscosity of mix (Pa·s): 1.5-2.5 (# 3 - 20 rpm).
Workability time: approx. 40 min. at +10°C; approx 25 min. at +20°C; approx 15 min. at +30°C.
Set to foot traffic: approx. 30 h at +10°C; approx 24 h at +20°C; approx 16 h at +30°C.
Electrical resistance (EN 1081) (Ohm): 104these values may vary according to surrounding conditions (temperature and humidity) and the equipment used to take the readings.
Compressive strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 80 (MAPEFLOOR I 360 AS (without fillers).
Flexural strength after 28 days at +23°C (EN 196-1) (N/mm²): approx. 40 (MAPEFLOOR I 360 AS (without fillers).
Abrasion resistance - Taber abrasion meter (CS17 disk - 1,000 revs. - 1,000 g) after 7 days at 23°C (DIN 53109) (mg): 70.
Shore D hardness after 3 days at +23°C (DIN 53505): 77.
Adhesion to concrete (ISO 4624) (N/mm²): ≥ 1.5 (failure of concrete).
Storage: 24 months in its original packaging in a dry place at a temperature of between +5°C and +30°C.
Consumption: max. 2.5 kg/m².
Packaging: 20 kg kits (A + B).

Zugehörige Dokumente

Datenblatt
Herunterladen

Letzte Projekte MAPEFLOOR I 360 AS

Category icon PRODUCTION FACILITIES

2017/2018

ASK AIG PRODUCTION PLANT

Wilkowice, Polen

Fussbodenbeläge

Category icon PRODUCTION FACILITIES

Fábrica Zalux

Alhama de Aragon, Spanien

Industrieböden

Category icon PRODUCTION FACILITIES

2017

Lamborghini

Sant'Agata Bolognese, Italien

Industrieböden, Zusatzmittel

Category icon GEWERBE

2017

Lamborghini Automobili

Sant'Agata Bolognese, Italien

Industrieböden

Bleiben Sie in Kontakt

Melden Sie sich für unseren Newsletter an, um stets über Neuigkeiten von Mapei informiert zu werden