Fine-grained coloured coating made from acrylic resin in water dispersion and micro-granular quartz sand, for indoor and outdoor tennis courts, multi-purpose playing fields, cycle tracks and footpaths
Fine-grained coloured coating made from acrylic resin in water dispersion and…
MAPECOAT TNS URBAN is an acrylic resin in water dispersion with selected fillers specifically formulated in MAPEI Research & Development laboratories for coating and protecting cycle lanes ,…
MAPECOAT TNS URBAN is an acrylic resin in water dispersion with selected…
Fibre-filled liquid membrane in water emulsion with high solar reflectance and thermal emittance with a solar reflectance index (SRI) of 105. TECHNICAL DATA: Consistency: paste. Application…
Fibre-filled liquid membrane in water emulsion with high solar reflectance and…
High-Performance, Fiber-Reinforced Skimcoating Compound Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to…
High-Performance, Fiber-Reinforced Skimcoating Compound Planiprep SC is a…
MAPECOAT TNS FINISH 1.3.4 is a coloured acrylic resin-based coating product with selected fillers, specifically formulated for indoor and outdoor tennis courts . It is available in three court-pace…
MAPECOAT TNS FINISH 1.3.4 is a coloured acrylic resin-based coating product…
One-component, aliphatic polyurethane binder for decorative open-pore floors made with natural open-pore aggregates. TECHNICAL DATA: Colour of mix: transparent. Consistency of mix: fluid. Workability…
One-component, aliphatic polyurethane binder for decorative open-pore floors…
Two-component, trade levelling and smoothing compound, protein-free with low odour and high compressive strength. For levelling differences in thickness from 1-10mm to receive all types of floor…
Two-component, trade levelling and smoothing compound, protein-free with low…
Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…
Two-component, solvent-free epoxy primer used as bonding promoter for products…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…
Polyurethane solvent-free primer for absorbent substrate to promote adhesion of MAPEFLEX one-component polyurethane sealants on all types of porous absorbent building substrates such as concrete,…
Polyurethane solvent-free primer for absorbent substrate to promote adhesion of…
LAMPOSILEX is a pre-blended powder binder composed of high-strength cements and special admixtures formulated to plug any source of water, even under pressure, in basements, tunnels, subways etc. and…
LAMPOSILEX is a pre-blended powder binder composed of high-strength cements and…
A solvent-free non-staining acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required.
A solvent-free non-staining acrylic-based adhesive designed to provide a…
Two-component solvent-free primer. Applications: Treatment of gypsum and anhydrite surfaces before the installation of ceramic tiles or stone material with cementitious adhesives. Mapeprim SP…
Two-component solvent-free primer. Applications: Treatment of gypsum and…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin coatings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour of mix: transparent straw-coloured.…
Two-component epoxy binder for trowelled mortar or bonding promoter for resin…
DESCRIPTION: One-component, anti-corrosion cementitious mortar for steel reinforcement rods. APPLICATIONS: Mapefer 1K is used as a re-alkalising corrosion-inhibiting protection for reinforcing rods…
DESCRIPTION: One-component, anti-corrosion cementitious mortar for steel…
Admixture for applying PURTOP EASY waterproofing membranes in just one single coat. TECHNICAL DATA: Consistency: liquid. Colour: brown. Mixing ratio A/B with Purtop Easy (by weight): 100 : 8.…
Admixture for applying PURTOP EASY waterproofing membranes in just one single…
