MAPESTONE PFS 2 VISCO

The pre-blended, low viscosity mortar for grouting paving made from stone blocks and slabs which is open to vehicles.

MAPESTONE PFS 2 VISCO

The pre-blended, low viscosity mortar for grouting paving made from stone blocks and slabs which is open to vehicles.

FOR EN 206 EXPOSURE CLASSES XF4 AND XS3

COMPLIES WITH UNI 11714-1 STANDARDS

RESISTANT TO FREEZING WEATHER, DE-ICING SALTS, ACID, SEA-SPRAY AND HIGH TEMPERATURE VARIATIONS

MAPESTONE PFS2 VISCO is the pre-blended mortar recommended for grouting concrete slabs and blocks of concrete to create paving with better performance properties than traditional technology.

The product is available in a neutral version for decorative paving made from light coloured stone elements and in a dark grey version, ideal for decorative paving made from darker coloured stone. Used to install highly durable paving in areas that may get saturated or that are exposed to freeze/thaw cycles where de-icing salts and seawater are present.

The Mapestone Line is the line of Mapei solutions created and developed for creating high performance, durable, decorative stone paving, including paving subjected to heavy traffic conditions, which is compliant with current standards and has aesthetic qualities which make it suitable for use in old town and city centres of historical and artistic interest and with all types of stone paving.

MAPESTONE PFS 2 VISCO

Pre-mixed, low viscosity, high-strength mortar with good resistance to de-icing salts, seawater and freeze-thaw cycles, exposure class XF4 and XS3, for grouting architectural flagstone and block stone paving.

ADVANTAGES:

Complies with UNI 11714-1 standards
Resistant to freezing weather, de-icing salts, acid, sea-spray and high temperature variations
For EN 206 exposure classes XF4 and XS3
Thanks to its low viscosity it is very effective in filling air pockets around cobblestones and between cobblestones and the installation bed.
Suitable for surfaces with vehicle access

TECHNICAL DATA
Pot life of mix: 40 mins.
Waiting time before putting into service: 7 days.
Colour: basic and Dark Grey.
Application: slurry poured into grout lines using suitable containers.
Cleaning: wet sponge and then light, steady jet of water or with a suitable cleaning machine.
Storage: 12 months; protect from moisture.
Consumption: according to the thickness of the slabs/blocks and the width and depth of the grout lines.
Packaging: 20 kg bags.