Project Ferenc Puskás Stadium, Budapest


Yard	New building
Location	Budapest, Hungary
Subcategory	STADIUM
Application	Supply of products for industrial floor, waterproofing, concrete repair, ceramic installation
Start and finish date	2017/2019
Application Type	New building
Client	National Centres for Sports (NSK)
Contractor company	Magyar Építő Zrt., ZÁÉV Zrt., Épkar Zrt., WHB Ltd.
Installer companies	Spectech Ltd., Akvaszig Ltd., Tipox Betontechnika Ltd., Stukkó Ltd., Ratskó Bau Ltd., Dominó Ltd.
Architects	György Skardeli
MAPEI Distributor	BNF Áruház, Csorna
Credits	OD Pictures
MAPEI Coordination	Gergely Garay, István Jankovits, Ervin Horváth, Zsolt Marton, Zsolt Dunai

ADESILEX P9

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone materials. The white version has very high white balance and excellent workability.

High-performance cementitious adhesive with no vertical slip and extended open…

KERACOLOR FF

TECHNICAL DATA: Pot life: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to light foot traffic: 24 hours. Ready for use: 7 days. Colours: 14…

TECHNICAL DATA: Pot life: approx. 2 hours. Waiting time before finishing: 10-20…

MAPEBAND

DESCRIPTION: Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120…

DESCRIPTION: Alkali-resistant rubber tape with felt for cementitious…

MAPEFER 1K

DESCRIPTION: One-component, anti-corrosion cementitious mortar for steel reinforcement rods. APPLICATIONS: Mapefer 1K is used as a re-alkalising corrosion-inhibiting protection for reinforcing rods…

DESCRIPTION: One-component, anti-corrosion cementitious mortar for steel…

MAPELASTIC AQUADEFENSE

DESCRIPTION: Ready-to-use, ultra quick-drying, flexible liquid membrane for waterproofing internal and external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from…

DESCRIPTION: Ready-to-use, ultra quick-drying, flexible liquid membrane for…

MAPELASTIC FOUNDATION

DESCRIPTION: Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing…

DESCRIPTION: Two-component, flexible cementitious mortar for waterproofing…

MAPENET 150

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. …

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

DESCRIPTION: Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is,…

DESCRIPTION: Acrylic primer in water dispersion with high penetration,…

PRIMER G

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix:…

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE.…

ULTRAPLAN RENOVATION

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses from 3 to 40 mm in a single application. APPLICATIONS: Where to use: internal floors for new or existing concrete,…

DESCRIPTION: Fibre-reinforced levelling compound for interiors for thicknesses…