Project Autodromo Nazionale di Monza, Monza

Autodromo Nazionale di Monza

Monza, Italy

Ref #: 232025

Category: SPORT FACILITIES


Yard	circuit
Location	Monza, Italy
Subcategory	SPORT FIELD
Built in	1922
Opened in	2024
Application	During the works affecting several areas of the facility, sustainability, durability, and technological innovation were equally prioritized.
Start and finish date	2024
Application Type	Asphalt pavements, Concrete restoration systems, Wall coverings, Waterproofing systems
Client	Automobil Club Italia
Contractor company	Maurizio Crispino, Impresa Bacchi Srl
Installer companies	Imperedil Srl
Specialists involved	Maurizio Crispino
Credits	Simone D’Addazio
MAPEI Coordination	Caprio Domenico

Product used for the project

DYNAMON XTEND W300 N

Dynamon XTend W300 N is a liquid admixture for high quality concrete, specially formulated to make concrete with a low water/cement ratio and a good maintenance of workability. Where to use: Thanks…

Dynamon XTend W300 N is a liquid admixture for high quality concrete, specially…

PVC waterstop for sealing expansion and cold joints Where to use: For waterproofing expansion and cold joints in new or existing civil, industrial and hydraulic constructions. Packaging: Idrostop PVC…

PVC waterstop for sealing expansion and cold joints Where to use: For…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPECOAT TNS PRIMER EPW

MAPECOAT TNS PRIMER EPW is a solvent-free , two-component epoxy primer in water dispersion according to a formula developed in the Mapei R&D laboratories, for surfaces to be coated with acrylic or…

MAPECOAT TNS PRIMER EPW is a solvent-free , two-component epoxy primer in water…

MAPEFAST CF/L

Chloride-free anti-freeze admixture to ensure regular setting times of cementitious mortar and concrete at temperatures down to -10°C. Also suitable for pre-compressed concrete.

Chloride-free anti-freeze admixture to ensure regular setting times of…

MAPEFER 1K ZERO

One-component, anti-corrosion cementitious mortar for steel reinforcement rods

MAPEFLEX PU50 SL

Paintable, castable polyurethane sealant with a low modulus of elasticity for movements up to 25%.

Paintable, castable polyurethane sealant with a low modulus of elasticity for…

MAPEFOAM

Round closed cell expanded polyethylene foam cord for the correct sizing of the movement joints. Applications: Placing at the base of the movement joints (expansion, separation, control, etc.).…

Round closed cell expanded polyethylene foam cord for the correct sizing of the…

POLYPRIMER HP 45 PROFESSIONAL

Bituminous primer made with blown bitumen and pure fast-drying solvents. POLYPRIMER HP 45 PROFESSIONAL is used as a primer for concrete surfaces, to stop dusting, allowing traditional or…

Bituminous primer made with blown bitumen and pure fast-drying solvents. …

TRIBLOCK P

Three component epoxy-cement based special primer. Can be used on absorbent and non-absorbent substrates. Can be used on damp substrates and those with high residual moisture. Apply two coats and…

Three component epoxy-cement based special primer. Can be used on absorbent and…