Project Grand Paradiso Hotel, San Giovanni Rotondo


Yard	bathrooms and rooms
Location	San Giovanni Rotondo, Italy
Subcategory	HOTEL/INN
Application	supply of products for ceramic installation and resins for interior design
Start and finish date	2017/2018
Application Type	Cementitious & resin flooring systems, Waterproofing systems
Client	HOTEL GRAN PARADISO
Contractor company	ARTISTA DEL PENNELLO
Installer companies	ARTISTA DEL PENNELLO
Architects	ARCH. LOISCIO VINCENZO
Specialists involved	ARCH. LOISCIO VINCENZO
MAPEI Distributor	SAVINO SRL
Project Manager	ARCH. LOISCIO VINCENZO
MAPEI Coordination	CANANRILE MICHELE - GUERRIERI RAFFAELE

EPORIP

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds. Suitable as a primer for tiling metal surfaces. Where to use: Monolithic construction joints between fresh and hardened…

Two-component solvent-free epoxy adhesive, for repairing cracks in screeds.…

Two-component, aliphatic, transparent polyurethane finish for absorbent surfaces. TECHNICAL DATA: Mixing ratio: comp A: comp. B = 4.9 : 5.1. Colour of mix: transparent. Consistency of mix: fluid. Dry…

Two-component, aliphatic, transparent polyurethane finish for absorbent…

MAPEFLOOR FINISH 52 W

Two component, polyurethane finishing sealer to be used as a dust-repellent and anti-oil finishing coat on concrete and Ultratop, or as a finishing coat on epoxy systems. Mapefloor Finish 52 W is…

Two component, polyurethane finishing sealer to be used as a dust-repellent and…

MAPEFLOOR FINISH 58 W

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix: transparent or coloured. Consistency of mix: fluid. Density of mix (kg/m³): 1,065-1,095. Abrasion…

TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PLANITOP 200

TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Packaging: 25 kg bags.

PRIMER GRIP WHITE

Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water dispersion with silica aggregates and very low emission of volatile organic compounds (VOC). For internal floors and…

Multi-purpose, ready-to-use, synthetic resin-based bonding promoter in water…

PRIMER LT

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars. For internal use. TECHNICAL DATA: Consistency: fluid liquid. Colour: white. Application: roller or brush. Consumption:…

Acrylic adhesion promoter for ULTRATOP LOFT and cementitious skimming mortars.…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

QUARZO 0,25 - 0,5 - 0,9 - 1,2 - 1,9

Washed kiln-dried quartz sand for use with epoxy and polyurethane resin

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds.

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

TRIBLOCK P

Three component epoxy-cement based special primer. Can be used on absorbent and non-absorbent substrates. Can be used on damp substrates and those with high residual moisture. Apply two coats and…

Three component epoxy-cement based special primer. Can be used on absorbent and…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable coarse-textured cementitious paste applied in layers…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable fine-textured cementitious paste applied in layers up…