Project I Bagni Misteriosi, Milan

I Bagni Misteriosi

Milan, Italy

Projects

The Mysterious Baths by Giorgio de Chirico get a facelift

Mapei technology and products for the renovation of sculptures by Giorgio de Chirico in the gardens of Milan’s design museum.

Find out more

Ref #: 4695

Category: SPECIAL PROJECT


Yard	Waterproofing
Location	Milan, Italy
Subcategory	SCULPTURES
Built in	2009
Opened in	2010
Application	Sculputures restoring and waterproofing
Application Type	Waterproofing systems
Client	Assessorato alla Cultura, Comune di Milano
Contractor company	GFM - Restauro Opere d’Arte (Brescia)
Architects	Gianfranco Mingardi
Credits	Dal Magro/Bandera

Product used for the project

ADESILEX PG1/PG2

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part product based on epoxy resins, special hardeners, selected fine aggregate and special additives. Adesilex PG1 hardens in…

Thixotropic epoxy adhesive for structural bonding. Adesilex PG1 is a two-part…

ANTIPLUVIOL W

Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…

Transparent, silane and siloxane water-repellent impregnator in watery…

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open time: 10-15 minutes. Waiting time before grouting: 2-3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use:…

TECHNICAL DATA FOR Keraquick S1 Zero + LATEX PLUS Pot life: 30 minutes. Open…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPE-ANTIQUE MC

MAPE-ANTIQUE MC is a cement-free, pure hydrated lime and Eco-Pozzolan-based , macro-porous, salt-resistant dehumidifying system containing recycled materials for eco-sustainable restoration work on…

MAPE-ANTIQUE MC is a cement-free, pure hydrated lime and Eco-Pozzolan-based…

MAPELASTIC FOUNDATION

Two-component flexible cementitious mortar for waterproofing concrete and masonry surfaces subject to negative and positive hydraulic pressure. Where to use: Waterproofing concrete and masonry…

Two-component flexible cementitious mortar for waterproofing concrete and…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…

SILANCOLOR CLEANER PLUS

TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dilution rate: diluted up to 300% of water. Waiting time before applying other products:…

TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO…

STABILCEM ARS

High-strength, cementitious sulphate binder for making fluid slurry and/or super-fluid injection mortar. Stabilcem ARS is used for making fluid slurry, mortar and beton applied by injection or…

High-strength, cementitious sulphate binder for making fluid slurry and/or…

WallGard Graffiti REMOVER GEL

Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is recommended for all surfaces not previously treated with graffiti-repellent protection against conventional spray-paints.…

Gel detergent for graffiti-damaged surfaces. WallGard Graffiti Remover Gel is…