Project Neftohimik Building,


Yard	Stone application and facade renovation
Location	Bulgaria
Subcategory	INDUSTRY
Built in	2019
Opened in	2020
Application	Products for ceramic and stone materials
Start and finish date	2019/2020
Application Type	Facade interventions, Installation of floors, Waterproofing systems
Client	Municipality of Burgas
Contractor company	Bulplast BG
Installer companies	Max Group
Project Manager	Marin Tzvetkov
MAPEI Coordination	Ivan Ivanov, Nikolay Zheliazkov, Petar Yankov

ADESILEX PG4

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding Mapeband, Mapeband TPE, PVC braces, Hypalon and for structural bonding. Adesilex PG4 is a two-component adhesive made up…

Two-component, thixotropic, epoxy adhesive with modified-rheology for bonding…

FUGOLASTIC

Liquid polymeric additive for enhancing the performance of KERACOLOR FF & KERACOLOR GG. Used as a substitute for water to mix KERACOLOR FF or KERACOLOR GG to improve the grout compactness,…

Liquid polymeric additive for enhancing the performance of KERACOLOR FF &…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX MAXI S1

High-performance, deformable cementitious adhesive with no vertical slip, extended open time, excellent workability and Low Dust technology for ceramic tiles, particularly recommended for bonding…

High-performance, deformable cementitious adhesive with no vertical slip,…

KERALASTIC T

White thixotropic version of KERALASTIC, particularly suitable for vertical applications. COVERAGE: approx. 2.5-5 kg/m2.

White thixotropic version of KERALASTIC, particularly suitable for vertical…

MAPEFOAM

Round closed cell expanded polyethylene foam cord for the correct sizing of the movement joints. Applications: Placing at the base of the movement joints (expansion, separation, control, etc.).…

Round closed cell expanded polyethylene foam cord for the correct sizing of the…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC AQUADEFENSE

Ready to use, flexible, ultra rapid drying waterproofing membrane for interior and exterior use in showers, wet rooms and on balconies*. Can be tiled after 4 hours. For use on screed, render,…

Ready to use, flexible, ultra rapid drying waterproofing membrane for interior…

MAPELUX LUCIDA

A high-strength, shiny metallic wax for use with the Mapefloor system, to protect floors subject to intense use. Mapelux Lucida is also used with Ultratop floors to facilitate easier maintenance of…

A high-strength, shiny metallic wax for use with the Mapefloor system, to…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when repairing façades, or for the execution of MAPETHERM thermal insulation systems. TECHNICAL DATA: Composition: 100% glass…

Alkali-resistant glass fibre mesh suitable for reinforced skimming layers when…

PLANICRETE

Synthetic rubber latex admixture to improve mechanical strength of cementitious mixes for screeds and renders. Also for producing bonding slurries for Mapei Screeds and splatterdash coats for renders…

Synthetic rubber latex admixture to improve mechanical strength of cementitious…

PLASTIMUL

Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing horizontal and vertical surfaces on foundations, retaining walls, concrete under-linings to roofs etc. Due to its…

Bituminous emulsion waterproofer and adhesive. Use Plastimul for waterproofing…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). Where to use: For treating gypsum surfaces prior to installing ceramic tiles. As an anchoring…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with Mapecolor Paste. Where to use: Primer SN has been specifically formulated to carry out preliminary priming treatments on surfaces before…

Two-component epoxy primer with fillers. May be coloured with Mapecolor Paste.…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

TOPCEM

Special fast drying hydraulic binder for producing bonded, unbonded or floating screeds, including those with piped underfloor heating. For interior and exterior use. Ceramic / porcelain tiles can be…

Special fast drying hydraulic binder for producing bonded, unbonded or floating…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar free from Portland cement with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable coarse-textured cementitious paste applied in layers…