Project Pannon University Institute of Physical Education and Sports, Strengthening Hall, Veszprém

Pannon University Institute of Physical Education and Sports, Strengthening Hall

Veszprém, Hungary

Ref #: 602021

Category: PUBLIC BUILDINGS AND PLACES


Yard	Installation of ceramic tiles on 102 square meters, installation of floors on 390 square meters.
Location	Veszprém, Hungary
Subcategory	UNIVERSITY
Application	Installation of ceramic tiles and installation of floors.
Start and finish date	2021
Application Type	Installation of floors, Waterproofing systems
Contractor company	Ökoházak Kft.
Installer companies	Ökoházak Kft.
MAPEI Distributor	Stavmat, Veszprém
Credits	Mário Bere
MAPEI Coordination	András Doma

Product used for the project

EPOJET

Superfluid epoxy resin for injection. Epojet is used for monolithic repair of structures which have cracked due to overloading, impact, earthquakes etc; it is also used for bonding and structural…

Superfluid epoxy resin for injection. Epojet is used for monolithic repair of…

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide.

Pre-blended, high-performance, polymer-modified cementitious mortar with…

TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: – rolls 120 mm wide by 50 m long; – rolls 120 mm wide by 10 m long; – 90° and 270°…

TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature…

MAPEFLOOR FINISH 630

Two-component, protective acrylic filming agent in water dispersion for concrete, ULTRATOP and ULTRATOP LIVING floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B: = 10 : 0.15. Colour of mix:…

Two-component, protective acrylic filming agent in water dispersion for…

MAPELASTIC AQUADEFENSE

MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for waterproofing damp areas such as bathrooms, showers, laundries, saunas, balconies and terraces before installing dressing…

MAPELASTIC AQUADEFENSE is a ready to use rapid-drying liquid membrane for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER G

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water according to the absorption of the substrate. Drying time: 2 hours according to the dilution rate and the…

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

ULTRABOND ECO V4 EVOLUTION

“All in one” universal adhesive with strong, rapid initial tack and long open time for resilient and textile floor and wall-coverings.

“All in one” universal adhesive with strong, rapid initial tack and long open…

ULTRATOP LOFT F

One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable coarse-textured cementitious paste applied in layers…

ULTRATOP LOFT W

One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.

One-component trowellable fine-textured cementitious paste applied in layers up…