Building Products | Construction Materials | Building Supplies

The only way of creating a durable, sustainable structure is to think in terms of systems rather than products.
This is why, year in year our, we create cutting-edge systems and materials to give you the opportunity of tackling the issue of the durability of structures and infrastructures from a new point of view.

Select a product category

Anchoring and fixing

Admixtures for mortars and concrete

Anchoring with expansive mortars and fixing with rapid setting binders

Asbestos cement treatment

Bonding and smoothing cellular bricks and expansive blocks

Carbon and glass-fibre structural reinforcement

Concrete structural reinforcement with carbon and glass fibre plates and fabrics

Dehumidifying mortars and binders for render

Elastic bonding and sealing

Form release and curing agents

Galvanic cathodic protection

Highway Maintenance

Horizontal chemical barriers

Hydrophobising products for concrete

Levelling screeds and floorings for walls and ceilings

Levelling screeds, substrates and existing flooring

Polymer resin floor coverings

Primers for substrate preparation

Protecting and decorating concrete and renders

Protecting reinforcement rods

Reinforcing and protecting industrial flooring

Repairing concrete with mortars and controlled-shrinkage binders

Repairing cracked concrete by injectiong casting

Screeding and substrate preparation

Sealing and waterproofing expansion and construction joints

Smoothing concrete surfaces and renders

Structural bonding with epoxy resins

Thermal insulation

Waterproofing

AQUAFLEX ROOF ID

ELASTOCOLOR WATERPROOF

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick…

Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…

FOAMJET F

Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject…

Ultra rapid setting two-component polyurethane resin with fluid consistency, to…

FOAMJET T/C

FOAMJET T/E

IDROSILEX

Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA: Consistency: powder or liquid. Pot life of mix: approximately 1 hour.…

Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA:…

IDROSILEX PRONTO

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency:…

Osmotic cementitious mortar suitable for contact with drinking water for…

IDROSTOP

Hydrophilic, expanding rubber profiles for waterproof working joints. TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP…

Hydrophilic, expanding rubber profiles for waterproof working joints. TECHNICAL…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C:…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPEGEL UTT SYSTEM

Three-component flexible hydrophilic gel for waterproofing injection in underground structures

Three-component flexible hydrophilic gel for waterproofing injection in…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix:…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA:…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPEPROOF

Bentonite waterproofing sheets for structures below ground level, suitable for both horizontal and vertical surfaces. TECHNICAL DATA: Lower layer of…

Bentonite waterproofing sheets for structures below ground level, suitable for…

MAPEPROOF SW

Bentonite sheet for waterproofing structures below ground level where saline water is present

Bentonite sheet for waterproofing structures below ground level where saline…

MAPETEX GRP 225

MAPETHENE TA

It is manufactured with non-woven polyester reinforcements that are impregnated and coated with a mixture of APP polymer modified bitumen. This…

It is manufactured with non-woven polyester reinforcements that are impregnated…

PLANISEAL 288

Two-component cementitious mortar for waterproofing structures below ground level and storage tanks. TECHNICAL DATA: Consistency: fluid; applicable…

Two-component cementitious mortar for waterproofing structures below ground…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content:…

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA:…

PLASTIMUL 1K SUPER PLUS

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres…

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high…

PLASTIMUL 2K PLUS

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility bitumen waterproofing emulsion containing cellulose fibres. TECHNICAL…

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility…

PLASTIMUL 2K REACTIVE

Two-component, solvent-free, eco-compatible, with high elasticity, instant bitumen waterproofing emulsion, applied by airless spray. TECHNICAL DATA:…

Two-component, solvent-free, eco-compatible, with high elasticity, instant…

PLASTIMUL 2K SUPER

Two-component, solvent-free, low-shrinkage, high yield, high-flexibility bitumen waterproofing emulsion containing polystyrene spheres. TECHNICAL…

Two-component, solvent-free, low-shrinkage, high yield, high-flexibility…

PLASTIMUL PRIMER

Solvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range. TECHNICAL DATA: Consistency:…

Solvent-free, bitumen primer for treating substrates before applying…

PLASTIMUL PRIMER SB

High-performance rapid-drying solvent-based bituminous primer for treating concrete surfaces before applying PLASTIMUL 2K REACTIVE. TECHNICAL DATA:…

High-performance rapid-drying solvent-based bituminous primer for treating…

PLASTIMUL PU-W

Water-based, highly elastic, polymer-modified, hybrid PU-asphalt membrane for waterproofing

Water-based, highly elastic, polymer-modified, hybrid PU-asphalt membrane for…

PRIMER PER AQUAFLEX

Synthetic resin-based primer in solvent solution to improve the adhesion of liquid elastic membranes (from the Aquaflex Roof line) onto existing…

Synthetic resin-based primer in solvent solution to improve the adhesion of…

RESFOAM 1 KM FLEX

Ultra-fluid, flexible one-component polyurethane injection resin for waterproofing structures

Ultra-fluid, flexible one-component polyurethane injection resin for…

RESFOAM 1KM

One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating…

One-component, ultra-fluid polyurethane resin applied by injection for…

RETE IN FIBRA DI VETRO

Alkali-resistant fibreglass mesh for reinforcing interior and exterior levelling compounds. Alkali-resistant Fibreglass Mesh 4x4.5 mm, 1,000 mm long…

Alkali-resistant fibreglass mesh for reinforcing interior and exterior…

Innovation and quality for the building industry

The line is made up of numerous products, including mortars for repairing, skimming and protecting concrete, epoxy mortars and systems for structural bonds, products for crack injection and products for making anchor points.