One-component pre-blended thixotropic mortar with controlled shrinkage for anchoring, by injection, of tie rods and bolts in all types of grounds. Use Stabilcem T for anchoring tie rods of any length…
One-component pre-blended thixotropic mortar with controlled shrinkage for…
Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…
Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…
Adhesive for rigid PVC p¬¬ipes. Solvent-based adhesive to form chemical welds in rigid PVC pipes, fittings, guttering, drains, siphons, etc. Adesilex T is a ready-to-use transparent fluid adhesive…
Adhesive for rigid PVC p¬¬ipes. Solvent-based adhesive to form chemical welds…
Solvent-free, ultra quick-setting synthetic polymer adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for bonding textile flooring and linoleum. TECHNICAL…
Solvent-free, ultra quick-setting synthetic polymer adhesive in water…
Form-release agent based on vegetable oils in water emulsion with chemical and physical action for improving architectural concrete Where to use DMA 3000 form-release agent is used as anti-adhesive…
Form-release agent based on vegetable oils in water emulsion with chemical and…
Chloride-free antifreeze for cementitious mortars and concrete. Antifreeze S is used to prepare mortars and concrete (including reinforced) for use at ambient temperature as low as to -10°C.…
Chloride-free antifreeze for cementitious mortars and concrete. Antifreeze S is…
Paintable, film-forming, light-coloured acrylic curing agent in solvent for mortar and concrete. TECHNICAL DATA: Application: roller or spray. Consumption: 0.11-0.15 kg/m². Packaging: 10 kg tanks.
Paintable, film-forming, light-coloured acrylic curing agent in solvent for…
Anti-evaporation agent in water emulsion for protecting the surface of concrete against quickly drying out when exposed to sunlight and winds. TECHNICAL DATA: Application: spray. Consumption: – neat:…
Anti-evaporation agent in water emulsion for protecting the surface of concrete…
Film-forming curing agent in solvent to protect mortar and concrete from drying out too quickly when exposed to sunlight and winds. TECHNICAL DATA: Application: roller or spray. Consumption:…
Film-forming curing agent in solvent to protect mortar and concrete from drying…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF can be used for the following applications: • High quality thixotropic mortar, resistant even under the most severe…
Silica fume-based admixture with pozzolanic action Where to use Mapeplast SF…
Keep in touch
