Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids content (EN ISO 3251) (%):…
Transpirant siloxane undercoat with a smooth finish. TECHNICAL DATA:…
Mapeflex PSU NS IN is a high performance, non-sag, chemical resistant elastomeric joint system. Due to its high polysulfide polymer content, it is resistant to many chemicals, shrinkage, ageing,…
Mapeflex PSU NS IN is a high performance, non-sag, chemical resistant…
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of steel reinforcement rods. TECHNICAL DATA: Thickness of plate: 0.25 mm.
Adhesive zinc plates applied directly on the surface of structures for galvanic…
Fibre-reinforced elastomeric, thick-layered finishing product with high filling properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…
Fibre-reinforced elastomeric, thick-layered finishing product with high filling…
Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…
Two-component, solvent-free epoxy primer used as bonding promoter for products…
Quick-setting, controlled-shrinkage thixotropic mortar for repairing the surface of concrete, may be applied in various thicknesses from 1 to 40 mm in a single layer. TECHNICAL DATA: Maximum…
Quick-setting, controlled-shrinkage thixotropic mortar for repairing the…
Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA: Consistency: powder or liquid. Pot life of mix: approximately 1 hour. Storage: 12 months. Consumption: – IDROSILEX…
Bulk powder or liquid water-repellent for cementitious mortar. TECHNICAL DATA:…
Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Where to use: walls only. Open time: ≥ 30 minutes. Waiting…
Ready-to-use adhesive paste with no vertical slip and long open time for…
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B…
Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…
Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to…
Ready-to-use flexible liquid membrane with fibres for continuous waterproofing…
Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced mortar for structural “reinforced” strengthening work, when used in combination with mesh from the MAPEGRID line, and for…
Two-component ready-mixed, high ductility pozzolan-reaction, fibre-reinforced…
Mapeflex MS45 IN is a one-component, high performance sealant based on Hybrid Polyurethane Technology with an excellent UV, Weather and temperature resistance. It has an excellent adhesion over a…
Mapeflex MS45 IN is a one-component, high performance sealant based on…
Mapeflex MS40 IN is one component, high performance sealant based on Hybrid Polyurethane Technology. It is Solvent, Silicone and Isocyanate Free as well as having an excellent UV, weather and…
Mapeflex MS40 IN is one component, high performance sealant based on Hybrid…
One-component cementitious levelling mortar for building up slopes on roofs over new and old waterproof sheaths. TECHNICAL DATA: Consistency: powder. Colour of mix: light grey. Applicable thickness…
One-component cementitious levelling mortar for building up slopes on roofs…
Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in sito using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks and flat roofs. TECHNICAL…
