Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Alkali-resistant, primed basalt-fibre mesh for structural “reinforced” strengthening of stone masonry, brick, tuff and concrete surfaces. TECHNICAL DATA: Type of fibre: basalt fibre. Weight: 250…
Alkali-resistant, primed basalt-fibre mesh for structural “reinforced”…
Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL DATA: Mixing ratio: A/B/C = 7.5/2.5/90. Consistency of mix: damp sand. Application temperature range: from +5°C to +30°C.…
Three-component acid and wear-resistant epoxy mortar for floors. TECHNICAL…
Two-component epoxy-polyurethane resin used to form flexible waterproof and chemical-resistant coats before bonding ceramic. TECHNICAL DATA: Consistency: creamy paste. Density: 1,400 kg/m³.…
Two-component epoxy-polyurethane resin used to form flexible waterproof and…
One component, highly-flexible cementitious mortar for waterproofing concrete, balconies, terraces, bathrooms and swimming pools. Monolastic Ultra is used for waterproofing balconies, terraces,…
One component, highly-flexible cementitious mortar for waterproofing concrete,…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced stitching in masonry. TECHNICAL DATA: Tensile modulus of elasticity: 170,000 N/mm². Content of fibre by weight: 68%. Tensile…
Pultruded carbon fibre tube impregnated with epoxy resin for reinforced…
Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where to use – Industrial floorings in concrete for indoors and outdoors. – Ready-mix and precast concrete where it is…
Curing liquid admixture for reducing the hydraulic shrinkage of concrete Where…
Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the permanent encapsulation of type A (external view), B (internal view) and C (no view, before confinement) in compliance…
Permanent encapsulation of asbestos cement. Use Aquaflex System cycle for the…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
One-component, high-performance, deformable, lightweight cementitious adhesive with no vertical slip, long open time, Low Dust technology and extremely high yield easy to apply by trowel, for ceramic…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel waterproofing. • Open cut tunnel waterproofing. • Underground structures waterproofing. Packaging Mapeplan TU S is supplied in…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel…
Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency: powder. Pot life of mix: approx. 1 h.…
Osmotic cementitious mortar suitable for contact with drinking water, for…
