Super-plasticizers based on a modified acrylic polymer for precast concrete with low water/cement ratio and very high mechanical strengths at early and final age Where to use Dynamon SP1 is…
Super-plasticizers based on a modified acrylic polymer for precast concrete…
Three-component fluid epoxy mortar for anchorage work. TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A : comp. B : comp. C = 16 : 6 : 100. Pot life of mix: 1 hour (at…
Three-component fluid epoxy mortar for anchorage work. TECHNICAL DATA: Maximum…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use Expanfluid can be used in preparing: – grouts for filling the casings of post-tensioning cables in pre-stressed concrete;…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use…
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: - Interior levelling of new or existing substrates to make them ready to receive resilient or textile…
Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5…
One-component, solvent-free, moisture curing polyurethane primer with a very low emission level of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds. TECHNICAL…
One-component, solvent-free, moisture curing polyurethane primer with a very…
Semi-flexible acrylic resin basecoat and filling paste in water dispersion with selected fillers for preparing multi-discipline sports and tennis courts
Semi-flexible acrylic resin basecoat and filling paste in water dispersion with…
Structural polymer fibres for concrete and cementitious screeds. May be used to completely or partially substitute conventional reinforcement. Length of fibres: 24 and 42 mm. TECHNICAL DATA: Dosage:…
Structural polymer fibres for concrete and cementitious screeds. May be used to…
Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency. TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the…
Admixture to make epoxy and polyurethane products thicker with a thixotropic…
Stud for fixing insulating panels and composite insulating systems in place, with a plug with a metal/nylon pin and polypropylene body. TECHNICAL DATA: Composition: synthetic material with…
Stud for fixing insulating panels and composite insulating systems in place,…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for concrete Where to use: Mapefibre NS12 is particularly suitable for the following: production of concrete used for…
Mono-filament, virgin polypropylene fibres with a length of 12 and 18 mm, for…
