Easy-to-apply, high-performance cementitious adhesive with good back-buttering properties, for ceramic and stone tiles. Very low emission level of volatile organic compounds. Particularly suitable…
Easy-to-apply, high-performance cementitious adhesive with good back-buttering…
Two-component, transparent, non-yellowing epoxy coatings applied at a thickness of 1 mm for finishing coats on epoxy resin systems. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 100 : 50. Colour…
Two-component, transparent, non-yellowing epoxy coatings applied at a thickness…
Superfluidificante accelerante, integratore di parti fini, per calcestruzzi con elevata riduzione dell’acqua d’impasto ed alte resistenze meccaniche iniziali
Superfluidificante accelerante, integratore di parti fini, per calcestruzzi con…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Inflammable: yes. Storage: 12 months. Consumption: 0.25-1 litre per litre of PRIMER PU60 according to dilution rate…
Thinners for PRIMER PU60. TECHNICAL DATA: Consistency: liquid. Colour:…
Admixture for enhancing the pumpability of concrete Where to use Thanks to its special formula, Mapeplast PMX makes the cement mix highly cohesive. Mapeplast PMX is especially recommended for: –…
Admixture for enhancing the pumpability of concrete Where to use Thanks to its…
Ready-to-use, high performance adhesive paste with no vertical slip for laying ceramic tiles. TECHNICAL DATA: Open time: 20 minutes. Adjustment time: up to 30-35 minutes according to the absorption…
Ready-to-use, high performance adhesive paste with no vertical slip for laying…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid. Colour: light yellow. Density: 0.97 g/m³. Viscosity at +23°C: 200 mPa·s. Consumption: 2-3% of the total weight of the…
Solvent-free accelerator for epoxy primers. TECHNICAL DATA: Appearance: liquid.…
Admixture for cementitious mortar and smoothing compounds. TECHNICAL DATA: Consistency: thick liquid. Colour: white. Dilution rate: with water at a ratio of 1 : 4 - 1: 5 for priming. Storage: 12…
Admixture for cementitious mortar and smoothing compounds. TECHNICAL DATA:…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel waterproofing. • Open cut tunnel waterproofing. • Underground structures waterproofing. Packaging Mapeplan TU P is supplied in…
Synthetic waterproofing membrane Where to use • Drill and blast tunnel…
Form-release agent based on vegetable oils in water emulsion with chemical and physical action for improving architectural concrete Where to use DMA 3000 form-release agent is used as anti-adhesive…
Form-release agent based on vegetable oils in water emulsion with chemical and…
