Super-plasticizers based on a modified acrylic polymer for precast concrete with low water/cement ratio and very high mechanical strengths at early and final age in winter time, without steam curing…
Super-plasticizers based on a modified acrylic polymer for precast concrete…
Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing mortars applied on lime-based renders. Respectively available in white and light pink. Mape-Antique FC is a…
Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing…
Vinyl-acetate additive in water dispersion for cement based smoothing compounds. Where to use: Additive used for the preparation of cement based smoothing compounds to provide improved mechanical and…
Vinyl-acetate additive in water dispersion for cement based smoothing…
Bonding promoter in solvent for two-component epoxy, epoxy-polyurethane and polyurethane adhesives and thinner for PRIMER MF. TECHNICAL DATA: Consistency: liquid. Colour: pinky transparent. Dilution…
Bonding promoter in solvent for two-component epoxy, epoxy-polyurethane and…
Solvent-free one-component primer. Where to use: - To prepare flat, compact and non porous substrates such as ceramic tile and stone material floor and wall coverings before the application of MAPEI…
Solvent-free one-component primer. Where to use: - To prepare flat, compact and…
Waterproofing primer in water dispersion. TECHNICAL DATA: Consistency: liquid. Colour: pink. Waiting time between each coat: 20-30 minutes. Waiting time before laying coating: approx. 12 hours.…
Waterproofing primer in water dispersion. TECHNICAL DATA: Consistency: liquid.…
Bituminous primer in water dispersion. Where to use: Anchoring primer and initial levelling coat on new or existing substrates to make them suitable for PIANOCEM levelling compounds. Primer and first…
Bituminous primer in water dispersion. Where to use: Anchoring primer and…
Two-component epoxy primer in solvents for consolidating and waterproofing cementitious screeds and industrial floors. TECHNICAL DATA: Minimum waiting time: 24 hours according to the porosity of the…
Two-component epoxy primer in solvents for consolidating and waterproofing…
Water-based, solvent-free consolidator with high penetration properties for cementitious substrates. TECHNICAL DATA: Consistency: liquid. Colour: transparent. Drying time: according to the absorbency…
Water-based, solvent-free consolidator with high penetration properties for…
Gypsum based adhesive and levelling compound. Where to use: High resistance adhesive and levelling compound for: - installation of gypsum panels for precast partition walls; - fixing rosettes; -…
Gypsum based adhesive and levelling compound. Where to use: High resistance…
Synthetic stucco paste for smoothing walls. Where to use: Levelling compound on internal walls of float finished cement, stucco walls or panels in gypsum plaster or gypsum board, wood, wood…
Synthetic stucco paste for smoothing walls. Where to use: Levelling compound on…
Bituminous waterproofing compound. Where to use: Smoothing compound in water emulsion consisting of special bitumen and synthetic resins that, applied according to the procedure described below,…
Bituminous waterproofing compound. Where to use: Smoothing compound in water…
ULTRAPLAN TURBO Self-leveling, ultra quick-hardening smoothing compound from 1 to 10 mm. TECHNICAL DATA: Where to use: leveling and smoothing of standardized substrates including heated screeds…
ULTRAPLAN TURBO Self-leveling, ultra quick-hardening smoothing compound from 1…
Cement based levelling compound for floors and walls, for thicknesses up to 2 mm. Where to use: Covering of concrete walls and ceilings, levelling compound for small channels, finishing of rough…
Cement based levelling compound for floors and walls, for thicknesses up to 2…
Cement based levelling compound for floors and walls, for thicknesses from 1 to 5 mm for Pianocem M and from 2 to 15 mm for Pianocem G. Where to use: • internal levelling compound for new or existing…
Cement based levelling compound for floors and walls, for thicknesses from 1 to…
Fast setting (24 hours) self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: - Interior levelling of new or existing substrates to make them ready to receive all types of…
Fast setting (24 hours) self-levelling smoothing compound for thicknesses from…
