Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…
Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject to weal water ingress Where to use –…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to…
High viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to strong water ingress Where to use • Waterproofing rock…
High viscosity ultra rapid setting two-component polyurethane resin, to be…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar and concrete. TECHNICAL DATA: Mixing ratio: – injection slurry: 100 parts of STABILCEM with 32 parts of water; – mortar,…
Expansive, super-fluid cementitious binder for mixing injection slurry, mortar…
High-strength, cementitious sulphate binder for making fluid slurry and/or super-fluid injection mortar. Stabilcem ARS is used for making fluid slurry, mortar and beton applied by injection or…
High-strength, cementitious sulphate binder for making fluid slurry and/or…
Keep in touch
