Project A7 Vöestbrücke Linz, Sanierung,


Yard	Sanierung der Vorlandbrücke LZ33 vor der A7 Voestbrücke über die Donau
Location	Austria
Subcategory	BRIDGE
Application	Produkte zur Betoninstandsetzung von MAPEI
Application Type	Concrete restoration systems
Client	ASFINAG
Contractor company	Chembau GmbH - Granit
Credits	Denise Frunza
MAPEI Coordination	Peter Panzl

ADDITIX PE

Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency. TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the…

Admixture to make epoxy and polyurethane products thicker with a thixotropic…

COLORITE PERFORMANCE

Protective acrylic paint with high resistance to UV rays for internal and external use, available in a wide range of colours. TECHNICAL DATA: Consistency: thick liquid. Colour: white or various…

Protective acrylic paint with high resistance to UV rays for internal and…

ELASTOCOLOR PRIMER

Solvent-based high-penetration consolidating primer to even out surfaces. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.96. Dry solids…

Solvent-based high-penetration consolidating primer to even out surfaces.…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water.…

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFILL

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEFILL with 14-15 parts of water. Pot life of mix:…

Fluid expansive mortar for anchoring objects in place. TECHNICAL DATA: Maximum…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430 with 17.5-18.5…

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPEGROUT TISSOTROPICO

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

MONOFINISH

One-component, normal-setting cementitious mortar for smoothing concrete and cementitious render. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 100 parts of MONOFINISH with…

One-component, normal-setting cementitious mortar for smoothing concrete and…