Amerigo Vespucci International Airport

Florence, Italy

Ref #: 5769

Category: INFRASTRUCTURES


Yard	interior floors
Location	Florence, Italy
Subcategory	AIRPORT
Built in	1930
Opened in	2006
Application	supply of products for ceramic installation inside the terminals
Start and finish date	2017
Application Type	Floor/wall coverings
Client	Toscana Aeroporti SpA
Contractor company	ITAF srl (Pistoia)
Installer companies	Bi.Esse Massetti srl (Altopascio, LU) for screeds; C.A.E di Giuseppe Agozzino (Prato) for installing
Architects	Studio Amati Architetti (Roma); Dicecca Ingegneria (Altamura, BA); ing. Paolo De Santo (Firenze)
Specialists involved	Studio Amati Architetti (Roma); Dicecca Ingegneria (Altamura, BA); ing. Paolo De Santo (Firenze)
MAPEI Distributor	Spagnesi srl (Montale, PT)
Credits	Sergio Fortuna
Project Manager	ing. Alessandro Panattoni, Ingeco srl (Pisa)
MAPEI Coordination	Massimo Lombardi, Roberto Aiazzi, (Mapei SpA)

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

TOPCEM

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…