Project City of Dreams (Macau),

City of Dreams (Macau)

Hong Kong

Ref #: 852007

Category: COMMERCIAL FACILITIES


Yard	Hotel, Mall, Pool
Location	Hong Kong
Subcategory	HOTEL/INN
Application	MAPEI's construction materials were chosen for waterproofing, tile installation, rendering and floor screeding.
Start and finish date	2008/2009
Application Type	Floor/wall coverings
Contractor company	Joint Venture of Leighton, China State and John Holland
Installer companies	1. Themeworks International (Macau) Ltd / 2. iTop Construction Materials & Engineering Co Ltd/ 3. ASTEL (Macau) Ltd/ 4. Pat Davie (Macau) Ltd.
Architects	Melco Crown Entertainment Limited
MAPEI Distributor	Mapei China Ltd (Hong Kong)

Product used for the project

ADESILEX P10

High-performance white cementitious adhesive, with no vertical slip and extended open time for glass, ceramic, vitrified mosaic and tiles, and natural stone.

High-performance white cementitious adhesive, with no vertical slip and…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When KERABOND, KERABOND T and KERABOND PLUS are mixed with ISOLASTIC they form a high-performance, highly deformable adhesive with…

Elasticising latex mixed with KERABOND, KERABOND T and ADESILEX P10. When…

KERACRETE

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm). TECHNICAL DATA: Pot life of mix: 90 minutes. Open time: 20 minutes. Waiting time before grouting: - on walls: 4-6 hours; - on…

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm).…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…