Project Escola ensino básico, Santa Maria da Feira


Yard	Escola ensino básico
Location	Santa Maria da Feira, Portugal
Subcategory	SCHOOL
Built in	2013
Opened in	2014
Application	Isolamento térmico pelo exterior, construção, cerâmica, impermeabilização
Application Type	New building
Client	Câmara Municipal de Santa Maria da Feira
Contractor company	Constructora San José
Architects	IDOM Arquitectos,Lda
MAPEI Distributor	Constructora San José / Capex Lda
Project Manager	IDOM Arquitectos,Lda

AQUAFLEX ROOF

Ready-to-use flexible liquid membrane with fibres for continuous waterproofing layers on exposed external surfaces. TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to…

Ready-to-use flexible liquid membrane with fibres for continuous waterproofing…

KERAFLEX

High-performance cementitious adhesive with no vertical slip and extended open time for ceramic and stone tiles.

High-performance cementitious adhesive with no vertical slip and extended open…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPEFIX VE SF

Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads. TECHNICAL DATA: Suitable substrates: all solid and…

Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads.…

MAPEGROUT TISSOTROPICO

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT TISSOTROPICO with 15.5-16.5 parts…

Fibre-reinforced, compensated-shrinkage mortar for repairing concrete.…

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp.…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPETHERM AR2

PLANITOP 100

Quick-setting, light-grey coloured fine mortar for repairing and smoothing concrete and render. TECHNICAL DATA: Maximum dimension of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP 100 with…

Quick-setting, light-grey coloured fine mortar for repairing and smoothing…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO PLUS

Highly protective, mould and mildew-resistant acrylic coating product with, for internal and external surfaces. Available in the following granulometries: 1.2 mm and 1.5 mm. TECHNICAL DATA:…

Highly protective, mould and mildew-resistant acrylic coating product with, for…

ULTRABOND SUPER GRIP

Adhesive for mounting internal fixtures. TECHNICAL DATA: Viscosity: creamy thixotropic paste. Open time: 10-15 minutes. Initial tensile strength: 17 N. Final tensile strength: 32.5 kg/cm². Hardening…

Adhesive for mounting internal fixtures. TECHNICAL DATA: Viscosity: creamy…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…