Ready-to-use adhesive paste with no vertical slip and long open time for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Where to use: walls only. Open time: ≥ 30 minutes. Waiting…
Ready-to-use adhesive paste with no vertical slip and long open time for…
Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic:…
Two-component, high-performance polyurethane adhesive for ceramic tiles and…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…
Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…
Alkali-resistant rubber tape with felt for cementitious waterproofing systems…
Acrylic adhesive in water dispersion for vinyl and textile floors with very low emission level of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: creamy paste. Colour: light beige.…
Acrylic adhesive in water dispersion for vinyl and textile floors with very low…
One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…
One-component primer for silicone sealants. TECHNICAL DATA: Application of…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…
ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…