Project Family house, Pécs, Pécs


Yard	Installation of ceramic tiles indoors, on a facade and on a terrace. Thermal insulation.
Location	Pécs, Hungary
Subcategory	HOUSE
Application	Installation of ceramic tiles, waterproofing, thermal insulation.
Start and finish date	2016/2018
Application Type	Floor/wall coverings, Waterproofing systems
Contractor company	Ofsys Ltd.
Installer companies	Ofsys Ltd.
Architects	Gábor Kerfélessy
MAPEI Distributor	Bau Systeme 92 Kft.
MAPEI Coordination	László Takács

KERACOLOR FF

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect ® technology for grouting joints up to 6 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours.…

Pre-blended, high-performance, polymer-modified cementitious mortar with…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

MAPEGUM WPS

Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage: 24 months.…

Quick-drying flexible liquid membrane for waterproofing internal surfaces.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PLASTIMUL 1K SUPER PLUS

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres and rubber granules. TECHNICAL DATA: Consistency:…

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

QUARZOLITE BASE COAT

Coloured acrylic undercoat with a smooth finish and good filling and adhesion promoting properties, for internal and external surfaces. TECHNICAL DATA: Consistency: thick liquid. Colour: white or…

Coloured acrylic undercoat with a smooth finish and good filling and adhesion…

QUARZOLITE TONACHINO

High-protection, thick-layered acrylic coating product with high filling properties for internal and external surfaces. Available in the following granulometries: 0.7 mm, 1.2 mm, 1.5 mm and 2.0 mm.…

High-protection, thick-layered acrylic coating product with high filling…

ULTRACOLOR PLUS

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious mortar for grouting joints up to 20 mm wide. The range of colours of ULTRACOLOR PLUS grouts brings out the beauty of any…

ULTRACOLOR PLUS is a high performance, quick-setting and drying cementitious…