Project Maison Des Landes Hotel, Jersey

Maison Des Landes Hotel

Jersey, United Kingdom

Ref #: 12102025

Category: PUBLIC BUILDINGS AND PLACES


Yard	A Mapei waterproofing and tiling system has been used to complete a pool installation at Jersey’s Maison Des Landes Hotel.
Location	Jersey, United Kingdom
Subcategory	HOTEL/INN
Application	An accessible hotel and community hub, Maison Des Landes is designed specifically for people with disabilities and their carers.
Application Type	Tile & stone installation systems
Installer companies	Jersey-based Ian Guiney
Specialists involved	Romerils of Jersey

Product used for the project

ADESILEX P10

High-performance white cementitious adhesive, with no vertical slip and extended open time for glass, ceramic, vitrified mosaic and tiles, and natural stone.

High-performance white cementitious adhesive, with no vertical slip and…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Fine-grained, high-performance white cementitious mortar for grouting joints up…

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120 mmx50 m rolls; –…

Alkali-resistant rubber tape with felt for cementitious waterproofing systems…

MAPEFIX PE SF

Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL DATA: Suitable substrates: all full or perforated substrates. Recommended penetration technique: drill or hammer-drill.…

Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL…

MAPEFIX VE SF

Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads. TECHNICAL DATA: Suitable substrates: all solid and…

Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads.…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…