Project Mapletree Business City 2,

Mapletree Business City 2

Singapore

Ref #: 650131

Category: COMMERCIAL FACILITIES


Yard	Business Park
Location	Singapore
Subcategory	SHOPPING CENTER
Built in	2014
Opened in	2016
Application	installation of ceramics and stone materials inside and outside
Start and finish date	2015/2016
Application Type	Floor/wall coverings
Client	Shimizu Corporation
Contractor company	Shimizu Corporation
Installer companies	CSC Holdings Limited, Yangzijian International (S) Pte Ltd
Architects	DCA Architect
MAPEI Distributor	Mapei Far East Pte Ltd
MAPEI Coordination	Ryan Liaw (Mapei Far East, Singapore)
Other	Soon after the completion of MBC phase 1, major issues on the tile bonding surfaced. Installation materials were supplied by Laticrete. Tiles from the toilets debonded causing potential danger. At the request of the owner, Mapei did a thorough site inspect

Product used for the project

ADESILEX PG2 SP

Two-component thixotropic epoxy adhesive for bonding structural elements with extended workability

Two-component thixotropic epoxy adhesive for bonding structural elements with …

Pre-blended, high-performance polymer-modified cementitious mortar for grouting joints 4 to 15 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes.…

Pre-blended, high-performance polymer-modified cementitious mortar for grouting…

KERACOLOR SF

Fine-grained, high-performance white cementitious mortar for grouting joints up to 4 mm wide. TECHNICAL DATA: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Fine-grained, high-performance white cementitious mortar for grouting joints up…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material (minimum width of joints 3 mm). TECHNICAL DATA: Pot…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NOVOPLAN 21

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5 mm. Where to use: - Interior levelling of new or existing substrates to make them ready to receive resilient or textile…

Fast hardening self-levelling smoothing compound for thicknesses from 1 to 5…

PRIMER FD

One-component primer for silicone sealants. TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint).…

One-component primer for silicone sealants. TECHNICAL DATA: Application of…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER PU60

Moisture curing polyurethane resin for consolidating and waterproofing damp screeds. TECHNICAL DATA: Consistency: liquid. Colour: brown. Dilution ratio: from 25 to 100% with THINNER PU. Set to light…

Moisture curing polyurethane resin for consolidating and waterproofing damp…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…