Project National Arts School, Avana


Yard	Restoration
Location	Avana, Cuba
Subcategory	SCHOOL
Built in	2001
Opened in	2008
Application	Masonry restoration and ceramic installation
Application Type	Installation of floors
Client	Ministerio de Cultura de Cuba
Contractor company	Contingente Nico Lòpes, ENIA, ECOING 5, Carpinterìa Habana del MICONS, Empresa Constructora Puerto Carenas de la Oficina del Historiador
Architects	arch. Ricardo Porro, arch. Vittorio Garatti e arch. Roberto Gottardi
MAPEI Distributor	Arca 99 srl
Credits	Mapei SpA
Project Manager	Ministerio de la Constucciòn de Cuba - MICONS

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

ANTIPLUVIOL S

Ultra high-performance, transparent, siloxane resin water-repellent impregnator. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.8. Active…

Ultra high-performance, transparent, siloxane resin water-repellent…

ANTIPLUVIOL W

Transparent, silane and siloxane water-repellent impregnator in watery solution. TECHNICAL DATA: Consistency: fluid liquid. Colour: milky. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Active…

Transparent, silane and siloxane water-repellent impregnator in watery…

ELASTOCOLOR PRIMER

Solvent-based high-penetration consolidating primer to even out surfaces. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.96. Dry solids…

Solvent-based high-penetration consolidating primer to even out surfaces.…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…

FUGOLASTIC

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…

Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and drying cementitious adhesive for ceramic tiles and stone material (thickness of adhesive up to 10 mm). TECHNICAL DATA: Consistency:…

Two-component, high-performance, deformable, quick-setting and drying…

IDROSTOP

Hydrophilic, expanding rubber profiles for waterproof working joints. TECHNICAL DATA: Shape: pre-formed tape. Sizes available: 20x10 mm (IDROSTOP 10); 20x15 mm (IDROSTOP 15); 20x25 mm (IDROSTOP 25).…

Hydrophilic, expanding rubber profiles for waterproof working joints. TECHNICAL…

IDROSTOP MASTIC

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency: thixotropic paste. Dry solids content: 100%. Storage: 18 months. Application temperature range: from +5°C to +35°C. Dust dry:…

One-component adhesive for laying IDROSTOP. TECHNICAL DATA: Consistency:…

KERABOND

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm). TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: 20 minutes. Waiting time before grouting: – on walls: 4-8…

Cementitious adhesive for ceramic tiles (thickness of adhesive up to 5 mm).…

KERACRETE

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm). TECHNICAL DATA: Pot life of mix: 90 minutes. Open time: 20 minutes. Waiting time before grouting: - on walls: 4-6 hours; - on…

Synthetic latex rubber mixed with sand and cement (thickness up to 5 mm).…

KERANET

Acid-based cleaning solution for ceramic tiles. Particularly recommended for eliminating lime efflorescence and for the final cleaning step of Tuscany terracotta. In powder (concentrated) or liquid…

Acid-based cleaning solution for ceramic tiles. Particularly recommended for…

LAMPOCEM

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder. TECHNICAL DATA: Maximum dimension of aggregate: < 0.1 mm. Mixing ratio: 100 parts of LAMPOCEM with 20-21 parts of water.…

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C: approximately 1 minute. Storage: 12 months. Mixing…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPE-ANTIQUE FC

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing mortars applied on lime-based renders. Respectively available in white and light pink. Mape-Antique FC is a…

Salt-resistant, fine-grained lime- and Eco-Pozzolan-based transpirant smoothing…

MAPE-ANTIQUE I

Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with fillers applied by injection for consolidating masonry. TECHNICAL DATA: Maximum diameter of aggregate: 100 µm. Mixing…

Super-fluid, salt-resistant, lime and ECO-POZZOLAN-based, hydraulic binder with…

MAPE-ANTIQUE MC

Macro-porous, salt-resistant dehumidifying render made from lime and ECO-POZZOLAN for repairing old masonry, including on buildings of historical interest. TECHNICAL DATA: Maximum diameter of…

Macro-porous, salt-resistant dehumidifying render made from lime and…

MAPE-ANTIQUE RINZAFFO

Salt-resistant, transpirant lime and ECO-POZZOLAN scratch-coat mortar applied as a base layer for de-humidifying, transpirant and “structural” render. TECHNICAL DATA: Maximum diameter of aggregate:…

Salt-resistant, transpirant lime and ECO-POZZOLAN scratch-coat mortar applied…

MAPECOAT I 24

Two-component epoxy paint for anti-acid coatings on concrete surfaces.

MAPEFER

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix:…

Two-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFER 1K

One-component, anti-corrosion cementitious mortar for steel reinforcement rods. TECHNICAL DATA: Maximum dimension of aggregate: 0.5 mm. Mixing ratio: 100 parts of MAPEFER 1K with 20-22 parts of…

One-component, anti-corrosion cementitious mortar for steel reinforcement rods.…

MAPEFINISH

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 0.4 mm. Mixing ratio: 4 parts of MAPEFINISH comp. A with 1 part of MAPEFINISH comp. B. Pot…

Two-component cementitious mortar for finishing concrete. TECHNICAL DATA:…

MAPEFOAM

Closed-cell, extruded foam polyethylene cord used as a support for elastomer sealants to gauge the correct size of flexible joints. Supplied in rolls in various lengths according to the diameter of…

Closed-cell, extruded foam polyethylene cord used as a support for elastomer…

MAPEGROUT T60

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of MAPEGROUT T60 with 16.5-17.5 parts…

Fibre-reinforced, sulphate-resistant thixotropic mortar for repairing concrete.…

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools. TECHNICAL DATA: Consistency of mix: plastic-trowable. Mixing ratio: comp. A: comp. B =…

Two-component, flexible cementitious mortar for waterproofing balconies,…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPEWRAP C BI-AX

Balanced, high-strength, bi-directional carbon fibre fabric. TECHNICAL DATA: Weight: 230-360 g/m². Equivalent thickness of dry fabric: 0.064-0.10 mm. Tensile strength: > 4.800 MPa. Tensile modulus of…

Balanced, high-strength, bi-directional carbon fibre fabric. TECHNICAL DATA:…

PRIMER 3296

Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1: 1 or 1:2…

Acrylic primer in water dispersion with high penetration, consolidating and…

WallGard Graffiti REMOVER GEL

Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL DATA: Consistency: liquid gel. Colour: straw yellow. Density (EN ISO 2811-1) (g/cm³): approx. 0.85. Application: brush.…

Thixotropic detergent for cleaning surfaces damaged by graffiti. TECHNICAL…