MAPEWRAP 21

Superfluid epoxy resin for impregnation with MapeWrap "wet system".
MapeWrap 21 is a two-component superfluid solvent-free product based on epoxy resins, especially formulated for the impregnation, immediately before placing MapeWrap fabric.
Pour part B into part A and mix with a drill fitted with a stirrer until the resin is completely even.
Mixing ratio: 4 parts by weight of part A and 1 part by weight of part B. After mixing, the product remains workable for approximately 40 minutes at 23°C.
The impregnation of the MapeWrap fabric can be carried out manually by simply dipping the fabric into a basin or with suitable equipment when a lot of reinforcement is needed in the same structure and over large surface areas.
The impregnated fabric must be applied over the still fresh MapeWrap 11 or MapeWrap 12 making sure it is laid without wrinkles.

Consumption
from 0.12 to 1.7 kg/m depending on the type of impregnated fabric.

Packaging
2.5 kg (A B);
5 kg (A B).

Related documentation

Technical data sheet
Download
Safety Data Sheet
Download

Last Projects MAPEWRAP 21

Category icon COMMERCIAL FACILITIES

2018

Brantford Market Center

Brantford, Canada

Structural reinforcement

Category icon SPECIAL PROJECT

REHABILITACIÓN TORREONES PALACIO DE LA ASAMBLEA

MELILLA, Spain

Installation of floor and wall coverings, Waterproofing, Installation of floors, Structural reinforcement, Masonry restoration

Category icon PUBLIC BUILDINGS AND URBAN DESIGN

2016/2017

S. Antuono Church

Venafro, Italy

Structural reinforcement

Category icon PUBLIC BUILDINGS AND URBAN DESIGN

2017

St. Joseph Church

Corato, Italy

Structural reinforcement

Keep in touch

Subscribe to our newsletter to get Mapei news