Project S. Antuono Church, Venafro

S. Antuono Church

Venafro, Italy

CHIESA S.ANTUONO - DIOCESI ISERNIA/VENAFRO

Ref #: 5984

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	masonry structures
Location	Venafro, Italy
Subcategory	CHURCH
Application	supply of products for restoration and structural strengthening
Start and finish date	2016/2017
Application Type	Products for structural strengthening
Client	DIOCESI ISERNIA-VENAFRO
Contractor company	COGEFA SRL
Installer companies	COGEFA SRL
Architects	ARCH. CARMINE MUCCIOLO
Specialists involved	ARCH. CARMINE MUCCIOLO
MAPEI Distributor	NUOVA EDILE SRL
Project Manager	ARCH. CARMINE MUCCIOLO
MAPEI Coordination	DISPOTO GIAMMARIO - POLLUTRO GIOVANNI
Other	RUP DONO GIROLAMO DELLO IACONO

Product used for the project

MAPE-ANTIQUE ALLETTAMENTO

Salt-resistant masonry mortar, made from natural hydraulic lime and ECO-POZZOLAN, for installation layers and pointing on “natural finish” masonry. TECHNICAL DATA: Maximum size of aggregate: 1.5 mm.…

Salt-resistant masonry mortar, made from natural hydraulic lime and…

MAPE-ANTIQUE F21

Super fluid cement-free fillerized lime- and Eco-Pozzolan-based hydraulic binder, for consolidating, by injection, stone, brick and tuff structures, especially suitable for frescoed walls.…

Super fluid cement-free fillerized lime- and Eco-Pozzolan-based hydraulic…

MAPEGRID G 220

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh size: 25 x 25 mm. Tensile strength (kN/m): 45. Elongation at failure: < 3%. Packaging: 45.70 m x 90 cm rolls.

TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh…

MAPEWRAP 21

Superfluid epoxy resin for impregnation with MapeWrap "wet system". MapeWrap 21 is a two-component superfluid solvent-free product based on epoxy resins, especially formulated for the impregnation,…

Superfluid epoxy resin for impregnation with MapeWrap "wet system". MapeWrap 21…

MAPEWRAP 31

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system". MapeWrap 31 is a two-component solvent-free paste product based on epoxy resins, especially formulated for the impregnation,…

Medium viscosity epoxy resin for impregnation with MapeWrap "dry system".…

MAPEWRAP G FIOCCO

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid epoxy resin). MapeWrap G FIOCCO is a complete range of cord in unidirectional fibreglass. It is used for creating…

Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP 200

DESCRIPTION: One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to…

DESCRIPTION: One-component cementitious mortar with high bonding strength for…

TECHNICAL DATA: Maximum dimension of aggregate: 1.5 mm. Mixing ratio: 1 25 kg comp. A with 1 drums of comp. B. Pot life of mix: approximately 1 hour (at +20°C). Thickness applied: from 3 to 10 mm per…

TECHNICAL DATA: Maximum dimension of aggregate: 1.5 mm. Mixing ratio: 1 25 kg…

Product not found

QUARZO 1,2

Product not available for this market,
contact us

S. Antuono Church

Construction

Browse the project Gallery

Product used for the project

Keep in touch