Project Carmine Church, San Severo

Carmine Church

San Severo, Italy

Ref #: 5076

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	restoration and consolidation
Location	San Severo, Italy
Subcategory	CHURCH
Built in	2010
Opened in	2010
Application	structure reinforcement with FRP System
Application Type	Products for structural strengthening
Client	Arciconfraternita del Carmine
Contractor company	Buoncristano Costruzioni sas
Installer companies	Buoncristano Costruzioni sas
Architects	ing. Domenico Cannone
MAPEI Distributor	Progetto Casa di San Severo
Credits	ing. Giammario Dispoto
Project Manager	ing. Domenico Cannone

Product used for the project

MAPE-ANTIQUE F21

Super fluid cement-free fillerized lime- and Eco-Pozzolan-based hydraulic binder, for consolidating, by injection, stone, brick and tuff structures, especially suitable for frescoed walls.…

Super fluid cement-free fillerized lime- and Eco-Pozzolan-based hydraulic…

MAPE-ANTIQUE MC

Pre-packed, cement-free, light coloured dehumidifying lime- and Eco-Pozzolan-based mortar for the restoration of damp stone, brick and tuff masonry. Mape-Antique MC is especially recommended for the…

Pre-packed, cement-free, light coloured dehumidifying lime- and…

MAPEWRAP C FIOCCO

Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid epoxy resin). MapeWrap C FIOCCO is a complete range of cord in unidirectional carbon fibre with a high modulus of…

Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid…

MAPEWRAP C QUADRI-AX

Balanced, high-strength, quadri-directional carbon fibre fabric

MAPEWRAP C UNI-AX

High strength uni-directional continuous carbon fibre fabric with high and very high moduls of elasticity. MapeWrap C UNI-AX and MapeWrap C UNI-AX HM are uni-directional continuous carbon fibre…

High strength uni-directional continuous carbon fibre fabric with high and very…

MAPEWRAP PRIMER 1

Two-component epoxy primer specifically formulated for the MAPEWRAP system. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Workability time: 90 minutes (at +23°C). Bond strength to…

Two-component epoxy primer specifically formulated for the MAPEWRAP system.…

PLANITOP HDM MAXI

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…

TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…