Project Court of Justice in Belgrade, Belgrade


Yard	Court of Justice in Belgrade
Location	Belgrade, Serbia
Subcategory	LAW COURTS
Built in	2006
Opened in	2009
Application	Concrete facade restoration
Application Type	Facade interventions
Contractor company	Ratko Mitrovic Dedinje d.o.o.
Installer companies	Ratko Mitrovic Dedinje d.o.o.
Architects	Gojko Todic
MAPEI Distributor	BWC d.o.o.
Credits	Nebojsa Janic, Melanija Pavlovic
Project Manager	Goran Mitic

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

GRANIRAPID

DESCRIPTION: High performance, deformable, fast setting and hydration two-component cementitious adhesive for ceramic tiles and stone material. APPLICATIONS: Particularly suitable for the…

DESCRIPTION: High performance, deformable, fast setting and hydration…

MALECH

Water-based acrylic undercoat and bonding promoter with a smooth finish. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 1.01. Dry solids…

Water-based acrylic undercoat and bonding promoter with a smooth finish.…

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPEGROUT T60

DESCRIPTION: Sulphate-resistant thixotropic fibre-reinforced mortar for the repair of concrete. Use Mapegrout T60 to repair damaged concrete surfaces such as balconies and corners of columns and…

DESCRIPTION: Sulphate-resistant thixotropic fibre-reinforced mortar for the…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PLANITOP 200 - Smoothing Mortar

DESCRIPTION: One-component cementitious mortar with high bonding strength for interior and exterior smoothing of rough surfaces and for finishing walls (fine texture effect). Planitop 200 is used to…

DESCRIPTION: One-component cementitious mortar with high bonding strength for…

PRIMER FD

TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 200 g bottles.

TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent…

TOPCEM

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts. Workability time: 40÷60 minutes. Set to light…

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…