Project Wellness center FORTYSEVEN, Baden, Baden

Wellness center FORTYSEVEN, Baden

Baden, Switzerland

Ref #: 4594

Category: TOURISM AND WELLNESS

Construction


Yard	Waterproofing & installation of ceramics tiles
Location	Baden, Switzerland
Subcategory	Spa
Application	Delivery of products for waterproofing & ceramics
Start and finish date	2018/2021
Application Type	Tile & stone installation systems, Waterproofing systems
Contractor company	Stiftung Gesundheitsförderung Bad Zurzach + Baden, Bad Zurzach
Installer companies	Bula AG, Neftenbach & Jola Construct GmbH, Hünenberg
Architects	Mario Botta Architetti, Mendrisio
Credits	Gianni Baumann
Project Manager	HRS Real Estate AG, Zürich
MAPEI Coordination	Maurizio Barletta, Mathias Donauer, Pirmin Nünlist

Product used for the project

ADESILEX PG4

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

KERAPOXY ADHESIVE

TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12 hours. Ready for use: 2 days. Colours: grey and white. Application: suitable notched…

TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to…

KERAPOXY EASY DESIGN

Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and clean, ideal for grouting ceramic tiles, glass mosaics and…

Two-component, versatile, decorative, acid-resistant epoxy grout, with a…

MAPEBAND EASY

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315…

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of…

MAPEBAND FLEX ROLL

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A hardness: approx. 80. Width: 300 mm (other sizes available upon…

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at…

MAPECOAT I 24

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may be used for concrete floors, storage tanks and flumes which come into contact with aggressive chemicals, such as acids,…

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may…

MAPEGROUT 430

DESCRIPTION: Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 100 parts of MAPEGROUT 430…

DESCRIPTION: Fine-grained, fibre-reinforced, normal-setting thixotropic mortar…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…