Project Operations and maintenance center of the TPF, Givisiez, Granges-Paccot

Operations and maintenance center of the TPF, Givisiez

Granges-Paccot, Switzerland

Ref #: 4540

Category: PRODUCTION AND SERVICES

Construction


Yard	Operations and maintenance center of the TPF, Givisiez
Location	Granges-Paccot, Switzerland
Subcategory	PLANT
Built in	2016
Opened in	2019
Application	Delivery of concrete admixtures, waterproofing products and products for ceramics
Start and finish date	2016/2019
Application Type	Admixtures for concrete, Floor/wall covering, Waterproofing systems
Contractor company	Transports publics fribourgeois (TPF), Fribourg
Installer companies	Isoltech Morel Sàrl, Châtel-St-Denis; Carrelages Sassi SA, Corminboeuf
Architects	CSD Ingénieurs SA, Fribourg; SD Ingénierie Fribourg SA, Fribourg; Stucky ingénieurs-conseils SA, Renens
Specialists involved	Frutiger SA, Fribourg
Credits	Sébastien Crettaz
MAPEI Coordination	Alexandre Perona, Thierry Sandoz

Product used for the project

ADESILEX PG4

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…

DYNAMON SX 14

Fine aggregate supplementing super-plasticizer for concrete with low loss of workability and high reduction of mixing water Where to use Dynamon SX 14 is particularly suitable for all applications…

Fine aggregate supplementing super-plasticizer for concrete with low loss of…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

KERAQUICK MAXI S1

High-performance, deformable, rapid-setting and hydrating, non-slip cementitious adhesive with very low emission of volatile organic compounds for ceramic tiles and in particular for stone, including…

High-performance, deformable, rapid-setting and hydrating, non-slip…

MAPEBAND FLEX ROLL

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A hardness: approx. 80. Width: 300 mm (other sizes available upon…

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at…

MAPEGUM WPS - Liquid Waterproofing Membrane

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage:…

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal…

PLANITOP FAST 330 - Levelling Mortar

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…