Project Renovation of non-swimmer outdoor pool at Heumatten, Windisch

Renovation of non-swimmer outdoor pool at Heumatten

Windisch, Switzerland

Ref #: 4656

Category: SPORT FACILITIES


Yard	non-swimmer pool
Location	Windisch, Switzerland
Subcategory	SWIMMING POOL
Application	Refurbishment of a non-swimmer's pool, which was previously covered with a foil. It is now covered with ceramic tiles. From project planning to execution, everything was accompanied by Mapei.
Start and finish date	2023
Application Type	Waterproofing systems
Installer companies	Shala Plattenbeläge GmbH, Gebenstorf
Architects	U.D.O. Architekten & Planer AG, Brugg
Specialists involved	Community of Windisch
MAPEI Coordination	Raffael Schöni

Product used for the project

ADESILEX PG4

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

KERAPOXY EASY DESIGN

Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and clean, ideal for grouting ceramic tiles, glass mosaics and…

Two-component, versatile, decorative, acid-resistant epoxy grout, with a…

MAPEBAND FLEX ROLL

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at failure: > 400%. Tear strength: > 600 N/cm. Shore A hardness: approx. 80. Width: 300 mm (other sizes available upon…

TECHNICAL DATA: Material: TPE. Tensile strength (N/mm²): > 6 MPa. Elongation at…

MAPECOAT PU 20 N

Two-component coloured aliphatic polyurethane topcoat for membranes from the Purtop range.

Two-component coloured aliphatic polyurethane topcoat for membranes from the…

MAPEGROUT 430 ZERO

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete. May also be applied with continuous-feed rendering machine

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing…

MAPENET 150

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm. Storage: unlimited. Packaging: 50 m x 1 m rolls.

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm.…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANITOP FAST 330 - Levelling Mortar

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…