Project Route 2020, Dubai


Yard	Tunnels and stations
Location	Dubai, United Arab Emirates
Subcategory	TUNNEL
Application	Supply of products for underground construction and ceramic installation
Application Type	Products for underground construction (utt)

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

GRANIRAPID

DESCRIPTION: High performance, deformable, fast setting and hydration two-component cementitious adhesive for ceramic tiles and stone material. APPLICATIONS: Particularly suitable for the…

DESCRIPTION: High performance, deformable, fast setting and hydration…

KERAFLEX MAXI S1

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes.…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

LAMPOSILEX

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use Lamposilex to plug any source of water, even under pressure, in basements, tunnels, subways etc. and for sealing…

Ultra-fast setting and drying hydraulic binder for plugging water leaks. Use…

MAPENET 150

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm. Storage: unlimited. Packaging: 50 m x 1 m rolls.

TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm.…

MAPEQUICK CBS SYSTEM 1

Liquid retarding admixture with plasticizing effect for cementitious-based injection systems

Liquid retarding admixture with plasticizing effect for cementitious-based…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%.

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

TOPCEM

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts. Workability time: 40÷60 minutes. Set to light…

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…

Ultra-fast hardening self-levelling smoothing compound with very low VOC…