Project Tatralandia Aquapark, Liptovský Mikuláš


Yard	outdoor and indoor pools
Location	Liptovský Mikuláš, Slovakia
Subcategory	Spa
Built in	2012
Application	supply of products for waterproofing and ceramics installation
Application Type	Floor/wall coverings
Client	J&T
Contractor company	J&T
Installer companies	RIASTAV, s.r.o.
MAPEI Distributor	MAPEI SK, s.r.o.
Project Manager	Vladimír Pytel

ADESILEX P10

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: ≥ 30 minutes.…

ADESILEX PG1

Two-component, rapid-setting thixotropic adhesive for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 35 minutes (at +23°C). Minimum applicable thickness:…

Two-component, rapid-setting thixotropic adhesive for structural bonds.…

ISOLASTIC

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and Adesilex P10. Applications: Isolastic is a latex additive to be mixed with Kerabond, Kerabond T or Kerafloor to improve…

Flexible latex additive to be mixed with Kerabond, Kerabond T, Kerafloor and…

KERAFLEX MAXI S1

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes.…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPECOAT I 24

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may be used for concrete floors, storage tanks and flumes which come into contact with aggressive chemicals, such as acids,…

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may…

MAPEFOAM

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPEGUM WPS - Liquid Waterproofing Membrane

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal surfaces. TECHNICAL DATA: Consistency: paste. Density of the mix: 1.45 g/cm³. pH: 9. Dry solids content: 73%. Storage:…

DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal…

MAPELASTIC SMART

Two-component, high-flexibility cementitious mortar, applied by brush or by roller, for waterproofing concrete surfaces such as balconies, terraces, basins and swimming pools, and for protection…

Two-component, high-flexibility cementitious mortar, applied by brush or by…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 KN/m. Deformation at maximum strain: – 90%…

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…

TOPCEM

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts. Workability time: 40÷60 minutes. Set to light…

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…