The aquatic centre had concrete decking around the pools that was slippery and absorbent and tracksite in the changing rooms that was delaminating. All mapei flooring product was mixed according to the technical date sheets. Tracksite antislip flooring was ground off existing concrete decking all decking was ground clean and vacuumed. Planiseal MR rolled out using 270mm/20mm nap roller sleeves. Quartz sand was broadcast into primer then left to cure. After curing excess sand was brushed, vacuumed then given a final brush. Mapefloor 300I was mixed and rolled out over sand with 270mm/10mm nap roller sleeves. Mapefloor finish 57 was applied within 24 hours on Mapefloor 300I with 270mm/7mm nap roller sleeves. All rolled coats where back rolled to achieve consistent application.
Ref #: 4722079475014260932
Category: TOURISM AND WELLNESS
Main, learners, spa pools, pool deck & changing rooms (includes hallways and family changing rooms)
Aquatic Centre, SWIMMING POOL
Mapei systems for resin flooring and tiling swimming pools
Mapecem was used to fill holes in the concrete.
Mapeex MS 45 silicone adhesive was used to fill control joints.
Graniripid was used to replace broken tiles in pools.
Start and finish date
Cementitious & resin flooring systems, Installation of floors, Sealants application, Waterproofing systems