PRIMER SN

Two-component epoxy primer with fillers.
May be coloured with MAPECOLOR PASTE.
TECHNICAL DATA:
Mixing ratio: component A : component B = 80 : 20.
Colour of mix: neutral.
Consistency of the mix: dense fluid.
Density of mix (kg/m³): 1500.
Viscosity of the mix (mPa•s): 1,200.
Pot life: 30 min.
Application temperature range: from +8°C to +35°C.
Dust dry at +23°C and 50% R.H.: 2-4 hours.
Set to light foot traffic at +23°C and 50% R.H.: 12 hours.
Final setting time: 7 days.
Application: flat American trowel or smooth trowel.
Consumption: 0.3-0.6 kg/m² per coat, depending on the absorbency and characteristics of the substrate.
Packaging: 20 kg units:

  • component A = 16 kg;
  • component B = 4 kg.

İlgili belgeler

Teknik veri sayfası
İndir

Son Projeler PRIMER SN

Category icon TİCARİ TESİSLER

2017/2018

Mapletree Logistics Hub

Port of Tanjung Pelepas, Malaysia

Cemetitious and resin floor coverings, Installatıon of floors

Category icon SPOR TESİSLERİ

2019

Yuk Chai Primary School Basketball Court

Petaling Jaya, Malaysia

Solutıons for sports floorıng

Category icon KAMU BİNALARI VE KENTSEL TASARIM

2017/2019

Educational Center “Sirius”

Sochi, Russian

Installatıon of floors

Category icon SPOR TESİSLERİ

2018/2019

VTB ARENA

Moscow, Russian

Cemetitious and resin floor coverings, Concrete restoratıon, Installatıon of floors, Masonry restoratıon, Waterproofıng

İrtibatta olalım

Mapei'den haber almak için bültenimize abone olun