Medium-strength (40 MPa), compensated-shrinkage fibre-reinforced thixotropic mortar for repairing concrete. TECHNICAL DATA: Maximum dimension of aggregate: 2.5 mm. Mixing ratio: 100 parts of…
Multi-purpose adhesive with long open time for vinyl, textiles and linoleum floor and wall coverings. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open…
Multi-purpose adhesive with long open time for vinyl, textiles and linoleum…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL DATA OF FUGOLASTIC + KERACOLOR: Pot life of mix: approx. 2 hours. Waiting time before finishing: 10-20 minutes. Set to…
Polymer liquid admix for KERACOLOR FF, KERACOLOR GG and KERACOLOR SF. TECHNICAL…
Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing membranes. Mapetex Sel is a non-woven, macro-holed fabric, made from synthetic polypropylene fibres, which is permeable to…
Non-woven, macro-holed polypropylene fabric for reinforcing waterproofing…
Fine-grained, ultra quick-drying, thixotropic smoothing compound for: – repairs up to 25 mm; – laying of resilient coverings after 1 hour. TECHNICAL DATA: Where to use: internal floors and walls for…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is used to encourage bonding on absorbent and porous cementitious substrates before applying Mapefloor I 500 W (Mapefloor…
Two-component transparent epoxy primer in water dispersion. Mapecoat I 600 W is…
Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free epoxy resin-based filling primer. It is used to improve the bonding of epoxy and polyurethane Mapefloor Systems and is…
Two-component, epoxy filling primer. Primer SN is a two-component, solvent-free…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open time: 60 minutes. Set to light foot traffic: approx. 10-12…
Two-component epoxy adhesive with no vertical slip for ceramic tiles and stone…
Synthetic-rubber latex for cementitious
mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for
screeds, renders, small-thickness renders, etc.…
Synthetic-rubber latex for cementitious
mixes. Applications: Admixture to…
Single-component, normal setting cementitious mortar for smoothing concrete surfaces WHERE TO USE Protection, smoothing and levelling of concrete surface imperfections up to 2 mm in a single…
Single-component, normal setting cementitious mortar for smoothing concrete…
Multipurpose latex additive for mortar and cementitious adhesive For the preparation of high performance mortar, screeds and renders. TECHNICAL DATA: Storage: 12 months. Consumption: depends on…
Multipurpose latex additive for mortar and cementitious adhesive For the…
Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…
Two-component, solvent-free epoxy primer used as bonding promoter for products…
POLYPRIMER is a bituminous primer containing oxidized bitumen and a mix of technical quick drying solvents. POLYPRIMER is recommended to block the dust and the porosity of concrete surfaces allowing…
POLYPRIMER is a bituminous primer containing oxidized bitumen and a mix of…
POLYPAINT ALU is a water-based bright silver protective paint based on copolymers, pigments and additives for the protection of talc, sand and granulated membranes and for liquid bituminous membranes…
POLYPAINT ALU is a water-based bright silver protective paint based on…
IDROPRIMER is a quick-drying bituminous water based primer containing selected bitumen. Compared to the common solvents- based primers, IDROPRIMER has the advantage of being not flammable and…
IDROPRIMER is a quick-drying bituminous water based primer containing selected…
_a3b1426c5abc42499210c7cc26154e1e.png?sfvrsn=77d61f8f_0)
