DESCRIPTION: Three-component polyurethane/cement-based mortar for making covings and details. TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/18 plus 0.25 parts by weight of MAPECOLOR PASTE. Colour…
DESCRIPTION: Three-component polyurethane/cement-based mortar for making…
DESCRIPTION: Bonding slurry prior to the installation of a TOPCEM PRONTO engineered screed. Suitable for indoor and outdoor use. TECHNICAL DATA: Mixing ratio: 3 parts of TOPCEM PRONTO SLURRY with 2…
DESCRIPTION: Bonding slurry prior to the installation of a TOPCEM PRONTO…
DESCRIPTION: Easy-to-apply high-performance deformable cementitious adhesive with extended open time and high wetting capacity for ceramic and porcelain tiles and stone materials. With very low…
DESCRIPTION: Ready-to-use grout smoother for LVT. This product is used to level off and smooth over (down to a feather edge in layers up to 2 mm thick) existing internal ceramic and stone surfaces.…
DESCRIPTION: Ready-to-use grout smoother for LVT. This product is used to level…
Fast grip, high performance adhesive in water dispersion for quick renovation of resilient floor coverings and for installing skirtings, coves and profiles. TECHNICAL DATA: Consistency: creamy paste.…
Fast grip, high performance adhesive in water dispersion for quick renovation…
TECHNICAL DATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315…
TECHNICAL DATA: Type of material: rubber sandwiched between two layers of…
ULTRAPLAN RENOVATION is a self-levelling smoothing compound used in interiors for levelling and smoothing differences in thicknesses from 3 to 50 mm on new or existing substrates, especially suitable…
ULTRAPLAN RENOVATION is a self-levelling smoothing compound used in interiors…
DESCRIPTION: Ultra fine textured skimming mortar for concrete; recommended for exposed finish surfaces. TECHNICAL DATA: Maximum size of aggregate: 0.2 mm. Mixing ratio: 100 parts of PLANITOP FINE…
DESCRIPTION: Ultra fine textured skimming mortar for concrete; recommended for…
DESCRIPTION: Universal high temperature adhesive in water dispersion with very low emission level of volatile organic compounds for resilient floor coverings. TECHNICAL DATA: Consistency: creamy…
DESCRIPTION: Universal high temperature adhesive in water dispersion with very…
TECHNICAL DATA: Consistency: fine powder. Where to use: internal floors, for resilient and wooden coatings. Pot life: 10-15 minutes. Thickness applied: 1-10 mm. Set to light foot traffic: 1 hour.…
TECHNICAL DATA: Consistency: fine powder. Where to use: internal floors, for…
Solvent-free contact adhesive for resilient and textile floor and wall coverings. ULTRABOND ECO CONTACT is a contact adhesive which has to be applied on both the substrate and the back of the…
Solvent-free contact adhesive for resilient and textile floor and wall…
DESCRIPTION: Self-adhesive butyl tape with alkali-resistant, non-woven fabric for elastic waterproofing systems. TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to +30°C.…
DESCRIPTION: Self-adhesive butyl tape with alkali-resistant, non-woven fabric…
DESCRIPTION: Light-coloured adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for installing conductive vinyl, rubber and textile flooring. TECHNICAL DATA:…
DESCRIPTION: Light-coloured adhesive in water dispersion with very low emission…
DESCRIPTION: Styrene-free, polyester resin chemical fastener for heavy loads. TECHNICAL DATA: Suitable substrates: all full or perforated substrates. Recommended penetration technique: drill or…
DESCRIPTION: Styrene-free, polyester resin chemical fastener for heavy loads.…
DESCRIPTION: PVC tape for waterproofing systems made from liquid membranes. TECHNICAL DATA: Thickness of tape: approximately 0.7 mm. In service temperature range: from -5°C to +30°C Packaging: –…
DESCRIPTION: PVC tape for waterproofing systems made from liquid membranes. …
Synthetic resin-based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…
Synthetic resin-based primer in water dispersion. Applications: Treating gypsum…
Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications : Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…
Ultra-fast hardening self-levelling smoothing compound with very low VOC…
