Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 15 mm. TECHNICAL DATA: Where to use: internal floors for ceramic, natural stone, resilient and wooden coatings.…
Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1…
DESCRIPTION: Quick-setting and hardening, compensated-shrinkage hi-flow mortar for repairing concrete and fixing drains, manholes and urban architectural fittings in place. TECHNICAL DATA: Maximum…
DESCRIPTION: Quick-setting and hardening, compensated-shrinkage hi-flow mortar…
Single-component adhesive for the installation of Idrostop Idrostop Mastic is a ready to use solvent-free single-component adhesive with a base of MS polymers. On extrusion, it is a thixotropic paste…
Single-component adhesive for the installation of Idrostop Idrostop Mastic is a…
DESCRIPTION: Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. Packaging: – 120…
DESCRIPTION: Alkali-resistant rubber tape with felt for cementitious…
DESCRIPTION: Controlled-shrinkage, fibre-reinforced mortar, with rapid setting and hardening for the repair of concrete. Use Mapegrout Fast-Set to repair damaged concrete surfaces such as balconies…
DESCRIPTION: Controlled-shrinkage, fibre-reinforced mortar, with rapid setting…
One-component, solvent-free, sililated polymer adhesive with very low emission level of volatile organic compounds, for all types of timber flooring including parquetry. TECHNICAL DATA: Consistency:…
One-component, solvent-free, sililated polymer adhesive with very low emission…
Adhesive in water dispersion with a quick, strong initial bond and very low emission level of volatile organic compounds (VOC), specially formulated for textile flooring. TECHNICAL DATA: Consistency:…
Adhesive in water dispersion with a quick, strong initial bond and very low…
Adhesive in water dispersion which remains permanently tacky with very low emission level of volatile organic compounds (VOC), for self-laying flooring tiles. TECHNICAL DATA: Consistency: creamy…
Adhesive in water dispersion which remains permanently tacky with very low…
DESCRIPTION: Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 20 kg bags of MAPECEM PRONTO with approximately…
DESCRIPTION: Pre-blended, ready-to-use, quick-setting and drying (24 hours),…
DESCRIPTION: Special fast setting hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage. APPLICATION: Formation of floating and bonded…
DESCRIPTION: Special fast setting hydraulic binder for the preparation of…
Latex Plus is a water dispersion of an extremely flexible polymer with low viscosity to be mixed with Keraquick S1 and Keraquick Maxi S1 , Nivorapid , and Planipatch in order to improve their…
Latex Plus is a water dispersion of an extremely flexible polymer with low…
Two-component, vapour-permeable, neutral-coloured epoxy formulate in water dispersion for industrial floors. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 1…
Two-component, vapour-permeable, neutral-coloured epoxy formulate in water…
Mapetard is used to retard the setting time of concrete and mortar to allow for placement and finishing operations to
take place under high ambient temperatures. It is recommended for applications…
Mapetard is used to retard the setting time of concrete and mortar to allow for…
DESCRIPTION: Ready-to-use polyurethane one-component, solvent-free, elastic adhesive for all types of wooden flooring. TECHNICAL DATA: Open time: 110 minutes Adjustability time: 3 hours Set to…
DESCRIPTION: Two component water-based epoxy primer and moisture barrier suitable for green concrete and damp substrates TECHNICAL DATA: Consistency: liquid. Colour: light grey - semi-gloss when…
DESCRIPTION: Two component water-based epoxy primer and moisture barrier…
Two-component, aliphatic, transparent or coloured, matt polyurethane finish in water dispersion. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 10:1 transparent - 11:1 if coloured. Colour of mix:…
Two-component, aliphatic, transparent or coloured, matt polyurethane finish in…
High performance two-component polyurethane adhesives for ceramic tiles and stone material. Applications: Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall…
High performance two-component polyurethane adhesives for ceramic tiles and…
