Project Hôpital de la Tour, Meyrin, Meyrin

Hôpital de la Tour, Meyrin

Meyrin, Switzerland

Ref #: 4544

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Floor coverings
Location	Meyrin, Switzerland
Subcategory	HOSPITAL
Built in	2016
Opened in	2019
Application	Delivery of products for floor coverings over an area of 12 000 square metres
Application Type	Installation of floors
Installer companies	Anhy SA, Plan-les-Ouates; Realsport Goup, Rossens
Architects	de Planta et Associés, Carouge; Aris Serbetis Architecte, Genève; Tridimensions architectes SA, Genève
Specialists involved	Hôpital de La Tour – construction management: Gestron Services (Suisse) SA, Genève
Credits	Sébastien Crettaz, Crans-Montana
MAPEI Coordination	Marcello Maieron

Product used for the project

ADESILEX LP

Polychloroprenic double-buttering adhesive in solvent for laying profiles, covings and resilient floors and coverings where immediate setting is required. TECHNICAL DATA: Consistency: thick liquid.…

Polychloroprenic double-buttering adhesive in solvent for laying profiles,…

MAPECEM PRONTO

DESCRIPTION: Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 20 kg bags of MAPECEM PRONTO with approximately…

DESCRIPTION: Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPECONTACT

Reinforced adhesive strip for laying profiles, base-boards, covings and resilient and textile coatings on steps. TECHNICAL DATA: Colour: – adhesive: transparent; – reinforcement: orange. Weight per…

Reinforced adhesive strip for laying profiles, base-boards, covings and…

MAPENET 150

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. …

DESCRIPTION: Alkali-resistant glass fibre mesh (in compliance with the ETAG…

PRIMER G

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum or anhydrite surfaces prior to installing ceramic tiles and stone material with cementitious adhesives or levelling.…

Synthetic resin-based primer in water dispersion. Applications: Treating gypsum…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

ULTRABOND ECO V4 SP CONDUCTIVE

DESCRIPTION: Light-coloured adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for installing conductive vinyl, rubber and textile flooring. TECHNICAL DATA:…

DESCRIPTION: Light-coloured adhesive in water dispersion with very low emission…

ULTRABOND ECO V4SP

Universal very high performance adhesive for resilient floor coverings

ULTRABOND ECO V4SP FIBER

DESCRIPTION: Multi-purpose, solvent-free, acrylic adhesive in water dispersion with extended open time and very low emission level of volatile organic compounds (VOC) improved by adding fibres,…

DESCRIPTION: Multi-purpose, solvent-free, acrylic adhesive in water dispersion…

ULTRAPLAN MAXI

DESCRIPTION: Ultra-fast hardening self-levelling smoothing compound for thicknesses from 3 to 40 mm. APPLICATION: Interior levelling of new and existing substrates to make them suitable for…

DESCRIPTION: Ultra-fast hardening self-levelling smoothing compound for…