Ultrabond ECO 3185 latex carpet pad adhesive is a water-based adhesive for fastening carpet padding permanently in place over any flooring surface. It has good initial tack and high strength to…
Ultrabond ECO 3185 latex carpet pad adhesive is a water-based adhesive for…
Mapecoat TNS Primer EPW is a two-part, epoxy primer in water dispersion for indoor and outdoor surfaces. It enhances the performance and the adhesion of Mapecoat TNS products.
Mapecoat TNS Primer EPW is a two-part, epoxy primer in water dispersion for…
High-Performance, Moisture-Resistant, Indoor/Outdoor Carpet Adhesive Ultrabond ECO 420 is a proprietary, water-based adhesive formulation designed for both indoor and outdoor carpet. Ultrabond ECO…
Scratch Coat Mortar , a premixed blend of 2 parts sand to 1 part Portland cement, should be used with metal lath over plywood substrates in preparation for interior residential ceramic tile and…
Scratch Coat Mortar , a premixed blend of 2 parts sand to 1 part Portland…
Mapetard 800 is a highly concentrated, set-retarding liquid admixture, which reduces the quantity of mixing water required to produce concrete of a standard consistency with the benefit of extended…
Mapetard 800 is a highly concentrated, set-retarding liquid admixture, which…
Mapefloor PU 400 FC is a two-component, fast-curing, polyurethane basecoat specifically designed for use as a waterproofing membrane for elevated concrete surfaces where the Mapefloor parking deck…
Mapefloor PU 400 FC is a two-component, fast-curing, polyurethane basecoat…
MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity, two-component, epoxy resin that is used as a seal coat for consolidating and priming concrete substrates. As the first component…
MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity,…
Premium Latex Additive for Kerabond and Kerabond T Keralastic is a premium-grade, high-performance, second-generation “flexible” acrylic latex additive used in the Kerabond/Keralastic and Kerabond…
Premium Latex Additive for Kerabond and Kerabond T Keralastic is a…
Kerabond T is a premium-grade, nonsag, nonslump mortar for use in thin-set and large-and-heavy-tile applications in interior/exterior residential and commercial floors and walls when mixed with water.
Kerabond T is a premium-grade, nonsag, nonslump mortar for use in thin-set and…
Kerabond T / Keralastic System is a high-performance, two-part system: Keralastic , a second-generation “flexible” acrylic latex additive, is used to enhance the performance of Kerabond T , which is…
Kerabond T / Keralastic System is a high-performance, two-part system:…
Planitop 18 ES is a one-component, high-early-strength, cementitious repair mortar, with a corrosion inhibitor, that has the very rapid-hardening characteristics of Planitop 18 but with an extended…
Planitop 18 ES is a one-component, high-early-strength, cementitious repair…
Mapecem 100 is a one-component, shrinkage-compensated, cementitious mortar intended for the renovation and topping of interior horizontal concrete and engineer-approved surfaces.
Mapecem 100 is a one-component, shrinkage-compensated, cementitious mortar…
Ker 121 is a professional-grade, single-component, high-performance mortar for the installation of ceramic, marble, granite and porcelain stoneware over most traditional and specialty substrates. Ker…
Ker 121 is a professional-grade, single-component, high-performance mortar for…
Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical exterior concrete, masonry, stucco and EIFS systems. Elastocolor Flex…
Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic…
Dynamon EW is a polymeric slump-retaining admixture designed to stabilize the concrete consistency for two hours or more, with little or no effect on set time at the recommended dosage. Dynamon EW is…
Dynamon EW is a polymeric slump-retaining admixture designed to stabilize the…
4 to 1 is a preblended mixture of finely graded sand and Portland cement used for thick-bed mortar installations. 4 to 1 flattens and levels an existing substrate before the installation of tile and…
4 to 1 is a preblended mixture of finely graded sand and Portland cement used…
MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in warm climates. MapeWrap 12 is also used for leveling…
MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural…
